Leveling the curve of Spee is a commonly-used strategy to correct deep bites. Although several techniques have been proposed to intrude mandibular incisors (MI), flaring of these teeth is often observed and in many instances undesired. A three-dimensional (3D) finite element model (FEM) was used to locate the ideal point of force application (PFA) to achieve pure MI intrusion with the three-piece arches’ technique. It comprised (1) a 0.021 × 0.025 in. stainless steel (SS) wire that passively filled the slots of the canine and premolar brackets and the first and second molar tubes, bilaterally; (2) a 0.0215 × 0.0275 in. SS intrusion base arch (IBA) inserted into the MI brackets, that presented a step down distal to the lateral incisors brackets and a posterior extension arm; (3) titanium-molybdenum tip-back springs designed to apply the intrusion force, fitted inside the first molar gingival tube. Four PFA on the IBA were simulated (FEM 1, 2, 3, and 4). FEM 3 resulted in pure MI and was considered the ideal PFA. FEM1 and 2 showed intrusion and buccal crown flaring of the MI, whereas FEM4 resulted in intrusion and lingual crown flaring of those teeth. Clinicians may consider three-piece arch mechanics to achieve pure MI intrusion. However, they must be aware that when force was applied anteriorly or posteriorly to the ideal PFA, the incisors would incline labially or lingually, respectively.
Digital photoelasticity is an important segment of optical metrology for stress analysis by digital photographic images. Advances in digital image processing, data acquisition, standard recognition and data storage allow the utilization of computer-aided techniques in the automation and improvement of the digital photoelastic technique. The objective of this study is to develop new techniques using 3D rapid prototyping with transparent resins in digital photoelasticity. Some innovations are proposed (e.g., a tapered roller bearing built with 3D rapid prototyping with transparent resin and the final assembly with the specimens prototyped separately). A metrology study is carried out with the new techniques developed.