Manufacturing processes in the shoe industry are still characterized to a large extent by human labour, especially in small and medium craft enterprises. Even when machinery is adopted to support manufacturing operations, in most cases an operator has to supervise or carry out the task. On the other hand, craft footwear industries are called to respond to continuous challenges to face the globalization effects, so that a rapid adaptability to customer needs is required. The industry 4.0 paradigms, which are taking place in the industrial environments, represent an excellent opportunity to improve the efficiency and quality of production, and a way to face international competitors. This paper analyses and proposes a robotic cell to automatize the process of glue deposition on shoe upper, which exploits a new means of depositing the glue compared to State-of-Art applications. While the latter mainly adopt glue gun spraying systems or pneumatic syringes, the proposed robotic cell is based on an extrusion system for the deposition of molten material originally in the form of a filament, similar to all extent to those adopted for Fused Deposition Modeling (FDM). Two cell solutions are designed and tested. In the former the extruder is the robot end effector and the shoe upper is grounded to the cell frame. In the second, being the reciprocal, the shoe last is clamped to the robot wrist and the extruder is fixed to the cell frame. The peculiarities of the two solutions are pointed out and compared in terms of cell layout, hardware, programming software and possibility to develop collaborative applications. A self developed slicing software allows designing the trajectories for glue deposition based on the CAD model of the shoe upper, also allowing driving the inclination of the extruder nozzle with respect to the vectors normal to the upper surface. Both the proposed cell layouts permit to achieve good quality and production times. The solution with the mobile extruder is able to deposit glue at highest end-effector speed (up to 200 mm/s). On the other hand, the solution with the mobile shoe upper and fixed extruder seems to be more appropriate to enhance collaborative applications.
Pick-and-place manipulators have become one of the principal components of almost all manufacturing plants. The process of sizing the number of manipulators required to efficiently carry out pick-and-place tasks depends on the complexities of such plants, the characteristics of the production line and the particular requirements. These aspects tend to make the sizing procedure rather complex and time consuming. Moreover, the results are closely linked to the accuracy of the input data that is usually, especially in the initial stages, unreliable and haphazard. To face these issues, the simulation tools currently available in the market are not always suitable. In this paper, a practical procedure to size the number of manipulators required in any particular plant to perform pick-and-place tasks is presented. This procedure results in a relatively simple tool capable of calculating the number of robots required in a line knowing the layout, type of robot to be used, and production characteristics. This tool is able to simulate the different distribution of goods on the line as well as the required strategies for picking in a multi-robot environment to test several production situations and assess the accuracy of the sizing.
12 August 2023 in The International Journal of Advanced Manufacturing Technology
In production systems characterized by small batches and high customization levels, operations are required to be flexible to adapt to different products within the shortest possible time and with the minimum effort for system setup. Contact-based operations such as surface finishing, polishing, deburring, and material deposition are mandatory in the fabrication of numerous products. To maintain consistent performance over time, many of these operations require a high level of accuracy, both in end-effector positioning and contact force level. This paper proposes a robotic solution to generate the robot working trajectory for contact-based operations over the external surface of unknown objects of which a digital model is not available or different from the actual state of the workpiece. The paper introduces the integration process of RGBD images to construct a 3D model and its elaboration to extract the workpiece. Different searching subroutines have been developed to select different areas of the workpiece based on the operation to be carried on and generate the related trajectory. The evaluation metric of the proposed robotic solution is given by the stability of the contact force exerted by the robotic tool and the error between generated and the actually followed trajectory due to the depth estimation of a low-cost camera. A few millimeters of the inaccuracy of the trajectory are obtained; these inaccuracies are compensated using force control. Different tests with different nominal values of the force control loop are carried out. Statistical analysis shows that the mean values of the contact force obtained coincide with the nominal value of the single tests.