Single-pixel holography (SPH) is capable of generating holographic images with rich spatial information by employing only a single-pixel detector. Thanks to the relatively low dark-noise production, high sensitivity, large bandwidth, and cheap price of single-pixel detectors in comparison to pixel-array detectors, SPH is becoming an attractive imaging modality at wavelengths where pixel-array detectors are not available or prohibitively expensive. In this work, we develop a high-throughput single-pixel compressive holography with a space-bandwidth-time product (SBP-T) of 41,667 pixels/s, realized by enabling phase stepping naturally in time and abandoning the need for phase-encoded illumination. This holographic system is scalable to provide either a large field of view (~83 mm²) or a high resolution (5.80 μm × 4.31 μm). In particular, high-resolution holographic images of biological tissues are presented, exhibiting rich contrast in both amplitude and phase. This work is an important step towards multi-spectrum imaging using a single-pixel detector in biophotonics.

A highly efficient on-chip acousto-optic modulator is as a key component and occupies an exceptional position in microwave-to-optical conversion. Homogeneous thin-film lithium niobate is preferentially employed to build the suspended configuration for the acoustic resonant cavity, with the aim of improving the modulation efficiency of the device. However, the limited cavity length and complex fabrication recipe of the suspended prototype restrain further breakthroughs in modulation efficiency and impose challenges for waveguide fabrication. In this work, based on a nonsuspended thin-film lithium niobate-chalcogenide glass hybrid Mach–Zehnder interferometer waveguide platform, we propose and demonstrate a built-in push-pull acousto-optic modulator with a half-wave-voltage-length product V_πL as low as 0.03 V cm that presents a modulation efficiency comparable to that of a state-of-the-art suspended counterpart. A microwave modulation link is demonstrated using our developed built-in push-pull acousto-optic modulator, which has the advantage of low power consumption. The nontrivial acousto-optic modulation performance benefits from the superior photoelastic property of the chalcogenide membrane and the completely bidirectional participation of the antisymmetric Rayleigh surface acoustic wave mode excited by the impedance-matched interdigital transducer, overcoming the issue of low modulation efficiency induced by the incoordinate energy attenuation of acoustic waves applied to the Mach–Zehnder interferometer with two arms in traditional push-pull acousto-optic modulators.

Photoacoustic tomography (PAT), also known as optoacoustic tomography, is an attractive imaging modality that provides optical contrast with acoustic resolutions. Recent progress in the applications of PAT largely relies on the development and employment of ultrasound sensor arrays with many elements. Although on-chip optical ultrasound sensors have been demonstrated with high sensitivity, large bandwidth, and small size, PAT with on-chip optical ultrasound sensor arrays is rarely reported. In this work, we demonstrate PAT with a chalcogenide-based micro-ring sensor array containing 15 elements, while each element supports a bandwidth of 175 MHz (−6 dB) and a noise-equivalent pressure of 2.2 mPaHz^−1/2. Moreover, by synthesizing a digital optical frequency comb (DOFC), we further develop an effective means of parallel interrogation to this sensor array. As a proof of concept, parallel interrogation with only one light source and one photoreceiver is demonstrated for PAT with this sensor array, providing images of fast-moving objects, leaf veins, and live zebrafish. The superior performance of the chalcogenide-based micro-ring sensor array and the effectiveness of the DOFC-enabled parallel interrogation offer great prospects for advancing applications in PAT.

It is foreseeable that the 100 Gb/s/ $\lambda$ and beyond passive optical network (PON) will be required in future optical access networks to meet the explosive growth of data traffic. The coherent optical systems could be a promising solution for the future beyond 100G PON. Coherent PON using digital subcarrier multiplexing (DSCM) can provide flexible bandwidth allocation to a large number of access subscribers by dividing subcarriers of the DSCM signal into time slots for time-and-frequency division multiple access. When the optical network unit is allocated a new subcarrier, digital signal processing (DSP) should converge fast in the allocated time slot to ensure a low handoff latency for real-time bandwidth allocation. However, the traditional coherent DSP is hard to realize fast convergence due to blind and complex algorithms. In this paper, we design a specific training sequence (TS) structure and propose data-aided DSP to achieve fast convergence for coherent PON. The feasibility of the proposed scheme is experimentally verified in an 8 Gbaud/SC×8 SCs 400 Gb/s-net-rate coherent PON using DSCM with 16 quadrature amplitude modulation. The experimental results show that fast convergence is jointly realized by the proposed TS structure and data-aided DSP using a 416-symbol TS with a 52 ns duration. The receiver sensitivity at the 20% soft-decision forward error correction limit is approximately -27 dBm and an optical power budget of about 35.5 dB is achieved with a booster amplifier.

In this paper, we propose adaptive channel-matched detection (ACMD) to effectively compensate channel distortions for C-band 64-Gbit/s intensity-modulation and direct-detection (IM/DD) optical on-off keying (OOK) system over a 100-km dispersion-uncompensated link. The proposed ACMD can adaptively compensate most of the link distortions based on channel and noise characteristics, which includes a polynomial nonlinear equalizer (PNLE), a decision feedback equalizer (DFE) and maximum likelihood sequence estimation (MLSE). Based on the channel characteristics, PNLE eliminates the linear and nonlinear distortions, while the followed DFE compensates the spectral nulls caused by chromatic dispersion. Finally, based on the noise characteristics, a post filter can whiten the noise for implementing optimal signal detection using MLSE. To the best of our knowledge, we present a record C-band 64-Gbit/s IM/DD optical OOK system over a 100 km dispersion-uncompensated link achieving 7% hard-decision forward error correction limit using only the proposed ACMD at the receiver side.