Real-time thermal management of electrical machines relies on sufficiently accurate indicators of internal temperature. One indicator of temperature in a permanent-magnet synchronous motor (PMSM) is the stator winding resistance. Detection of PMSM winding resistance in the literature has been made on machines with relatively high resistances, where the resistive voltage vector is significant under load. This paper describes two techniques, which can be applied to detect the winding resistance, through “angle” and “magnitude” current injection. Two further methods are described, which discriminate injected current and voltages from motoring currents and voltages: “unipolar” and “bipolar” separation. These enable the resistance to be determined, and hence the winding temperature in permanent-magnet machines. These methods can be applied under load, and in a manner that does not disturb motor torque or speed. The method distinguishes between changes in the electromotive force constant and the resistive voltage. This paper introduces the techniques, while a companion paper covers the application of one of the methods to a PMSM drive system.
DC-DC power converters such as buck converters are susceptible to degradation and failure due to operating under conditions of electrical stress and variable power sources in power conversion applications, such as electric vehicles and renewable energy. Some key components such as electrolytic capacitors degrade over time due to evaporation of the electrolyte. In this paper, a model-observer based scheme is proposed to monitor the states of Buck converters and to estimate their component parameters, such as capacitance and inductance. First, a diagnosis observer is proposed, and the generated residual vectors are applied for fault detection and isolation. Second, component condition parameters, such as capacitance and inductance are reconstructed using another novel observer with adaptive feedback law. Additionally, the observer structures and their theoretical performance are analyzed and proven. In contrast to existing reliability approaches applied in buck converters, the proposed scheme performs online-estimation for key parameters. Finally, buck converters in conventional dc-dc step-down and photovoltaic applications are investigated to test and validate the effectiveness of the proposed scheme in both simulation and laboratory experiments. Results demonstrate the feasibility, performance, and superiority of the proposed component parameter estimation scheme.
31 October 2016 in IEEE Transactions on Intelligent Transportation Systems
This paper draws upon earlier work, which developed a multiobjective speed profile generation framework for unimpeded taxiing aircraft. Here, we deal with how to seamlessly integrate such efficient speed profiles into a holistic decision-making framework. The availability of a set of nondominated unimpeded speed profiles for each taxiway segment, with respect to conflicting objectives, has the potential to significantly impact upon airport ground movement research. More specifically, the routing and scheduling function that was previously based on distance, emphasizing time efficiency, could now be based on richer information embedded within speed profiles, such as the taxiing times along segments, the corresponding fuel consumption, and the associated economic implications. The economic implications are exploited over a day of operation, to take into account cost differences between busier and quieter times of the airport. Therefore, a more cost-effective and tailored decision can be made, respecting the environmental impact. Preliminary results based on the proposed approach show a 9%-50% reduction in time and fuel respectively for two international airports: Zurich and Manchester. The study also suggests that, if the average power setting during the acceleration phase could be lifted from the level suggested by the International Civil Aviation Organization, ground operations may simultaneously improve both time and fuel efficiency. The work described in this paper aims to open up the possibility to move away from the conventional distance-based routing and scheduling to a more comprehensive framework, capturing the multifaceted needs of all stakeholders involved in airport ground operations.
11 November 2010 in International Journal of Automation and Computing
Two model reference adaptive system (MRAS) estimators are developed for identifying the parameters of permanent magnet synchronous motors (PMSM) based on the Lyapunov stability theorem and the Popov stability criterion, respectively. The proposed estimators only need online measurement of currents, voltages, and rotor speed to effectively estimate stator resistance, inductance, and rotor flux-linkage simultaneously. The performance of the estimators is compared and verified through simulations and experiments, which show that the two estimators are simple, have good robustness against parameter variation, and are accurate in parameter tracking. However, the estimator based on the Popov stability criterion, which can overcome parameter variation in a practical system, is superior in terms of response speed and convergence speed since there are both proportional and integral units in the estimator, in contrast to only one integral unit in the estimator based on the Lyapunov stability theorem. In addition, the estimator based on the Popov stability criterion does not need the expertise that is required in designing a Lyapunov function.