This study reports a new and significantly enhanced analysis of US flood hazard at 30 m spatial resolution. Specific improvements include updated hydrography data, new methods to determine channel depth, more rigorous flood frequency analysis, output downscaling to property tract level, and inclusion of the impact of local interventions in the flooding system. For the first time, we consider pluvial, fluvial, and coastal flood hazards within the same framework and provide projections for both current (rather than historic average) conditions and for future time periods centered on 2035 and 2050 under the RCP4.5 emissions pathway. Validation against high‐quality local models and the entire catalog of FEMA 1% annual probability flood maps yielded Critical Success Index values in the range 0.69–0.82. Significant improvements over a previous pluvial/fluvial model version are shown for high‐frequency events and coastal zones, along with minor improvements in areas where model performance was already good. The result is the first comprehensive and consistent national‐scale analysis of flood hazard for the conterminous US for both current and future conditions. Even though we consider a stabilization emissions scenario and a near‐future time horizon, we project clear patterns of changing flood hazard (3σ changes in 100 years inundated area of −3.8 to +16% at 1° scale), that are significant when considered as a proportion of the land area where human use is possible or in terms of the currently protected land area where the standard of flood defense protection may become compromised by this time.

Very high resolution synthetic aperture radar (SAR) sensors represent an alternative to aerial photography for delineating floods in built-up environments where flood risk is highest. However, even with currently available SAR image resolutions of 3 m and higher, signal returns from man-made structures hamper the accurate mapping of flooded areas. Enhanced image processing algorithms and a better exploitation of image archives are required to facilitate the use of microwave remote-sensing data for monitoring flood dynamics in urban areas. In this paper, a hybrid methodology combining backscatter thresholding, region growing, and change detection (CD) is introduced as an approach enabling the automated, objective, and reliable flood extent extraction from very high resolution urban SAR images. The method is based on the calibration of a statistical distribution of “open water” backscatter values from images of floods. Images acquired during dry conditions enable the identification of areas that are not “visible” to the sensor (i.e., regions affected by “shadow”) and that systematically behave as specular reflectors (e.g., smooth tarmac, permanent water bodies). CD with respect to a reference image thereby reduces overdetection of inundated areas. A case study of the July 2007 Severn River flood (UK) observed by airborne photography and the very high resolution SAR sensor on board TerraSAR-X highlights advantages and limitations of the method. Even though the proposed fully automated SAR-based flood-mapping technique overcomes some limitations of previous methods, further technological and methodological improvements are necessary for SAR-based flood detection in urban areas to match the mapping capability of high-quality aerial photography.

Flooding is a major hazard in both rural and urban areas worldwide, but it is in urban areas that the impacts are most severe. An investigation of the ability of high-resolution TerraSAR-X synthetic aperture radar (SAR) data to detect flooded regions in urban areas is described. The study uses a TerraSAR-X image of a one-in-150-year flood near Tewkesbury, U.K., in 2007, for which contemporaneous aerial photography exists for validation. The German Aerospace Center (DLR) SAR end-to-end simulator (SETES) was used in conjunction with airborne scanning laser altimetry (LiDAR) data to estimate regions of the image in which water would not be visible due to shadow or layover caused by buildings and taller vegetation. A semiautomatic algorithm for the detection of floodwater in urban areas is described, together with its validation using aerial photographs. Of the urban water pixels that are visible to TerraSAR-X, 76% were correctly detected, with an associated false positive rate of 25%. If all the urban water pixels were considered, including those in shadow and layover regions, these figures fell to 58% and 19%, respectively. The algorithm is aimed at producing urban flood extents with which to calibrate and validate urban flood inundation models, and these findings indicate that TerraSAR-X is capable of providing useful data for this purpose.