Khashayar Ebrahimi

Dr. Khashayar Ebrahimi

Gamma Technologies LLC., Westmont, Illinois, USA

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2015 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
CKC. R. Koch
C. R. Koch
A Model Predictive Control (MPC) strategy for Homogeneous Charge Compression Ignition (HCCI) combustion timing and output work control that takes into account actuator constraints is designed. The MPC is based on the linearized version of a nonlinear Control Oriented Model (COM). The COM for the HCCI engine has combustion timing and engine load as outputs and valve timing and fueling rate as the inputs. The COM model is developed and validated and found to be accurate enough for control purposes and can be implemented in real-time. A Detailed Physical Model (DPM) is used to test the controller using the valve timing and fueling rate as constrained actuators. Constraints on combustion timing and output work are also considered to prevent ringing or misfire. The simulation results show that the developed controller works over a range of load conditions and can maintain HCCI combustion timing and load to their desired values.

1 January 2019 in IFAC-PapersOnLine
Verified
Journal Article
Closed access
ANArmin Norouzi
Armin Norouzi
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
CKCharles Robert Koch
Charles Robert Koch

1 June 2018
Verified
Conference Paper
Closed access
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
CKC R Bob Koch
C R Bob Koch

1 June 2013
Verified
Conference Paper
Closed access
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
CKC. R. Koch
C. R. Koch
Homogeneous Charge Compression Ignition (HCCI) is a promising concept for combustion engines to reduce both emissions and fuel consumption. In HCCI engines, a homogeneous air-fuel mixture auto-ignites due to compression, which is unlike traditional spark ignition or diesel engines where ignition is started with either a spark or fuel injection. HCCI combustion control is a challenging issue because there is no direct initiator of combustion in these engines. Variable Valve Timing (VVT) is one effective way to control the combustion timing in HCCI engines. VVT changes the amount of trapped residual gas and the effective compression ratio both of which have a strong effect on combustion timing. In order to control HCCI combustion, a physics based control oriented model is developed that includes the effect of trapped residual gas on combustion timing. The control oriented model is obtained by model order reduction of complex chemical kinetic reaction mechanisms. This method allows different fuels to be incorporated using a standard methodology and fills the gap between complex models with highly detailed chemical kinetics and simple black box models that have been used in model based control. The control oriented model is used to develop ignition timing PI control using simulation. The PI control modulates the trapped residual gas using variable valve timing as the actuator. The results indicate that the controller can track step changes in HCCI combustion timing.

23 July 2007 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
MBMajid Bazargan
Majid Bazargan
SJSeyed Ali Jazayeri
Seyed Ali Jazayeri
A computer simulation of a four-stroke turbocharged diesel engine has been developed for combustion and performance studies. The combustion model accounts for spray geometry evolution, ignition delay, heat release rate, equilibrium product concentrations and heat transfer evaluation. In the model, the fuel spray is divided into five zones which are treated as open systems. While mass and energy equations are solved for each zone, a simplified momentum conservation equation is used to calculate the amount of air entrained into each zone. Details of the DI spray, combustion model and its implementation into the open cycle simulation are described in this paper. The model is validated by experimental data. First, prediction of spray penetration is validated against measurements in a pressurized constant volume chamber. Subsequently, predictions of heat release rates are compared with experimental data obtained from representative heavy-duty, turbocharged diesel engine and single cylinder engines. It is demonstrated that the model can predict the rate of heat release and engine performance with high accuracy.

1 June 2014
Verified
Conference Paper
Closed access
Khashayar EbrahimiKhashayar Ebrahimi
Khashayar Ebrahimi
ASAlexander Schramm
Alexander Schramm
CKC. R. Koch
C. R. Koch
Homogeneous Charge Compression Ignition (HCCI) engines have the advantage of low Nitrogen Oxides (NOx) and soot emissions. In HCCI engines, a lean premixed air-fuel mixture is compressed until the temperature is high enough for combustion to occur. HCCI engines have a limited operating range and are limited by knock at high loads and misfire at low loads. They are without a direct source to initiate ignition so HCCI requires combustion timing control. Some of the factors that affect HCCI combustion timing are mixture composition, pressure and temperature at the time of inlet valve closing. One effective way to control HCCI combustion timing is Variable Valve Timing (VVT). VVT changes the amount of trapped residual gas and the effective compression ratio. These factors have a strong effect on HCCI combustion timing. One main advantage of VVT is that it is fast enough to handle rapid transients. Based on a simplified control oriented model that models the effect of trapped residual gas on combustion timing, a Feedforward/Feedback controller is designed for HCCI combustion timing control. The controller requires feedforward information of the valve timing and feedback information of the combustion timing. This controller tracks the desired combustion timing trajectory both in simulation and experiment by modulating the trapped residual gas using VVT actuation.