High power and high energy density are important requirements for advanced energy storage systems in mobile electronic devices, electric vehicles, and military-grade high-rate energy storage systems. However, achieving both high power and high energy in a single device is very challenging because high power density usually leads to a tradeoff with low energy density in devices that rely on a single ion storage mechanism. In this work, we designed a hybrid energy storage device consisting of an intercalative battery cathode and a capacitive supercapacitor anode. As a proof-of-concept, we used LiFePO4 (LFP) nanoparticles on an aluminum (Al) leaf current collector as the battery electrode and a free-standing reduced graphene oxide/carbon nanotube (RGO/CNT) nanocarbon membrane as the supercapacitor electrode. The hybrid device possesses outstanding features including (1) an asymmetric electrode configuration; (2) an ultra-lightweight current collector for the cathode; (3) a current collector free anode; (4) a quasi-solid-state gel polymer electrolyte. Compared with conventional supercapacitors and lithium-ion batteries, our hybrid device exhibits superior performance with both high energy density (180 W h kg−1) and high power density (218 W kg−1), and enhanced safety imparted by the quasi-solid-state gel electrolyte, representing one new direction for developing high-energy/high-power energy storage devices.
Carbon nanotube (CNT) sensors provide a versatile chemical platform for ambient monitoring of ozone (O3) and nitrogen dioxide (NO2), two important airborne pollutants known to cause acute respiratory and cardiovascular health problems. CNTs have shown great potential for use as sensing layers due to their unique properties, including high surface to volume ratio, numerous active sites and crystal facets with high surface reactivity, and high thermal and electrical conductivity. With operational advantages such as compactness, low-power operation, and easy integration with electronics devices, nanotechnology is expected to have a significant impact on portable low-cost environmental sensors. Enhanced sensitivity is feasible by functionalizing the CNTs with polymers, metals, and metal oxides. This paper focuses on the design and performance of a two-element array of O3 and NO2 sensors comprising single-walled CNTs functionalized by covalent modification with organic functional groups. Unlike the conventional chemiresistor in which the change in DC resistance across the sensor terminals is measured, we characterize the sensor array response by measuring both the magnitude and phase of the AC impedance. Multivariate response provides higher degrees of freedom in sensor array data processing. The complex impedance of each sensor is measured at 5 kHz in a controlled gas-flow chamber using gas mixtures with O3 in the 60–120 ppb range and NO2 between 20 and 80 ppb. The measured data reveal response change in the 26–36% range for the O3 sensor and 5–31% for the NO2 sensor. Multivariate optimization is used to fit the laboratory measurements to a response surface mathematical model, from which sensitivity and selectivity are calculated. The ozone sensor exhibits high sensitivity (e.g., 5 to 6 MΩ/ppb for the impedance magnitude) and high selectivity (0.8 to 0.9) for interferent (NO2) levels below 30 ppb. However, the NO2 sensor is not selective.