Department of Ecology and Plant Polymers Technology, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Kyyiv, Misto, Ukraine
Prof. Dr. Olena Ivanenko
Department of Ecology and Plant Polymers Technology, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Kyyiv, Misto, Ukraine
The catalysts based on natural zeolite-clinoptilolite of Sokyrnytsia deposit modified with oxides of Mn4+, Fe2+, Fe3+, Cu2+, Cr3+ were synthesized. It was determined that 100% conversion of carbon monoxide was achieved at a temperature of 390ºC wnen using the copper-manganese-oxide catalyst (30%...
1 February 2020 in Journal of Ecological Engineering
The processes of the interaction of carbon material (thermoanthracite pouring) with a gas-air mixture in a heat chamber are studied while heating to 800-850 °C. The influence of temperature, oxygen and carbon dioxide concentration on the formation efficiency of carbon monoxide, carbon dioxide,...
5 April 2019 in Eastern-European Journal of Enterprise Technologies
Today, the most convenient and widespread option for cleaning and purifying drinking water is to install reverse osmosis systems directly at the water intake points. When operating reverse osmosis systems, most owners are not concerned about the negative consequences of using such systems. After...
19 January 2023 in EUREKA: Physics and Engineering
The article highlights the development of cheap affordable highly efficient catalytic oxidation system of harmful components of industrial flue gases of carbon graphite enterprises, its design features according to the parameters of furnace equipment, which will significantly improve the environmental safety of metallurgical and machine-building enterprises. The presented calculation and design solutions, in addition to carbon production, can be used in environmental protection technologies at other environmentally hazardous facilities to neutralize toxic emissions. The paper presents the calculation of the catalytic CO oxidation reactor made for the real flow rate of flue gases with temperature range 270−390 ºC, which come out of the combustion chamber of the Riedhammer "first fire" kiln, heated by the flue gases. For such medium exothermic processes, mass and heat transfer between gas flow and the outer surface of the catalyst grains is sufficient intense. In this case for description of the catalytic process in the reactor is sufficient to use quasi-homogeneous single-phase model. The model of plug-flow reactor with a fixed bed of catalyst was used to calculate the flow parameters of the gas mixture through a reactor loaded with a composite zeolite-based manganese-oxide catalyst in the process of catalytic CO oxidation. The calculation results obtained using the software CHEMCAD 7.1.5 were almost identical to the previously made calculation. The peculiarity of the suggested solution was the use of the designed catalytic reactor for treatment of large volume of flue gases with low concentrations of CO at the companies of electrode carbon graphite production