The progress of technology in consumer electronics demand an antenna having a compact size, high gain and bandwidth, and multiple antennas at transmitter and receiver to enhance the channel capacity. Over the last decade, numerous techniques are proposed to improve the performance of the antenna. One such technique is the use of metamaterials (MTMs) in antenna design. MTMs are artificial structures to provide unique electromagnetic properties that are not available in natural materials. The unique properties of these materials allow the design of high-performance antennas, filters, and microwave devices which cannot be obtained using traditional antennas. Loading antenna with the one, two, and three-dimensional MTM structures comprised of a periodic subwavelength unit cell exhibits RLC resonant structures and allows to manipulate electromagnetic waves in the antenna system. These structures offer low resonant frequency compared to the antenna resonant frequency resulting in antenna miniaturization and manipulation of electromagnetic waves helps in enhancing the gain and bandwidth, and achieving circular polarization (CP) of an antenna system. Also, metamaterial loading enhances isolation between the antenna elements in the multiple-input-multiple output (MIMO) system by suppressing the surface waves. In this paper, the electromagnetics of MTM with analytical expressions and its application in antenna design are discussed in detail. The MTM-based antennas are classified into MTM loading, MTM inspired antenna, metasurface loading, and composite right/left hand (CRLH) based antennas. The recent development in MTM inspired antenna and its application in antenna miniaturization, enhancing gain and bandwidth, achieving CP and mutual coupling suppression in MIMO antenna systems are discussed to make it useful for further research.
8 November 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
The progress in mobile communication and the internet of things facilitates multiple features. The trending technology demands wider bandwidth so that user experiences uninterruptedly. The wider bandwidth and the isolation are two key characteristics of modern device antennas. The design of an ultrawideband (UWB) and four-port MIMO antenna is presented in this study. The semicircular monopole patch is modified by including a guitar shape slot on a radiator and a half-circle slot in the lowered ground plane. The structural transformation affects the current path and enhances impedance matching, resulting in a broader bandwidth. The UWB monopole is replicated to construct a four-port multiple input and multiple output (MIMO) antenna. The separation between the interelement is less than the quarter wavelength. As a decoupling structure, the implicit mutual coupling in the MIMO elements is minimized by parasitic elements on the radiator and defected ground plane (DGS). A novel mesh-like structure embedded in radiating plane and DGS couples the current from an excited antenna and suppresses through the DGS correspondingly and improves the isolation. The overall geometry of the antenna is 45×45×1.6 mm3. The UWB MIMO has a measured impedance bandwidth of 113% between 4.5-16.4 GHz and greater than 20 dB of isolation throughout the bandwidth. Besides the mutual coupling reduction, radiation characteristics and all MIMO diversity parameters are studied. The performance of MIMO diversity characteristics is relatively good, with envelope correlation coefficient0.002, diversity gain.10, mean effective gain<-3 dB, total active reflection coefficient<-10dB, channel capacity loss <0.2 bps/Hz, and multiplexing efficiency<-0.5. The experimental and simulated findings are in line and make the projected design suitable for UWB MIMO applications.
A low-profile printed six-port ultrawideband (UWB) antenna with a novel decoupling structure for enhancing port-to-port isolation is analyzed in this paper. Six symmetrical pyramidal form UWB antennas with defective ground structures interspersed with parasitic components served as a unique decoupling structure in the proposed design. The grounded branches and modified rectangular stubs on the ground plane generate closed and open current distribution channels, causing the uniform current flow to be disrupted and the coupling effect to be neutralized. The projected six-port antenna has an electrical dimension of $0.68\times 0.89 \times 0.01\,\,\lambda ^{3}$ ( $\lambda $ is computed using a lower frequency of 2.9 GHz), having a below -10 dB impedance bandwidth of 116% from 2.9 to 11 GHz. Across the impedance bandwidth, the average port-to-port isolation is better than 20 dB. The antenna design has acceptable radiation properties with a peak gain of 8.3 dBi at a frequency of 7.5 GHz. Further, the projected design is also exposed to the time domain characteristics and diversity metrics. Among the different ports, the values of the group delay and fidelity factors are less than 1.5 ns and more than 0.92, correspondingly. The values of the diversity parameters such as ECC < 0.075, DG approximately 10 dB, MEG $ < -3$ dB, TARC $ < -10$ dB, CCL < 0.3 bps/Hz, and ME $ < -2$ dB ensure that the projected design is appropriate for the MIMO applications. The designed antenna is fabricated and measured, and the results are in line with the simulation.
In recent years, there has been a surge of interest in the field of wireless communication for designing a monitoring system to observe the activity of the human body remotely. With the use of wireless body area networks (WBAN), chronic health and physical activity may be tracked without interfering with routine lifestyle. This crucial real-time data transmission requires low power, high speed, and broader bandwidth communication. Ultrawideband (UWB) technology has been explored for short-range and high-speed applications to cater to these demands over the last decades. The antenna is a crucial component of the WBAN system, which lowers the overall system’s performance. The human body’s morphology necessitates a flexible antenna. In this article, we comprehensively survey the relevant flexible materials and their qualities utilized to develop the flexible antenna. Further, we retrospectively investigate the design issues and the strategies employed in designing the flexible UWB antenna, such as incorporating the modified ground layer, including the parasitic elements, coplanar waveguide, metamaterial loading, etc. To improve isolation and channel capacity in WBAN applications, the most recent decoupling structures proven in UWB MIMO technology are presented.
The advancement of electronic gadgets makes it possible for a device to be multipurpose, which calls for attributes such as compactness and larger bandwidth, with improved data transfer rate. This paper introduces the compact, closely placed two-port dual band-notched UWB antenna using a neutralization line as a decoupling structure. The projected antenna design comprised a circle and rectangle embedded monopole radiator with the defected ground structure to attain the UWB spectrum. Further dual notches are attained by carving the U-shape and inverted U-shape slots on the feedline and radiator. The dual band-notched UWB antennas are placed with the separation of 3.8 mm (0.04 λ; λ is computed using 3.4 GHz frequency). The coupling effect between the close proximity elements is decoupled using the neutralization line. The presented antenna has overall dimensions of 21.5 × 28 × 1.6 mm3 (0.24 × 0.31 × 0.01 λ3) and exhibits S11 below −10 dB from 3.4–11.9 GHz, with isolation better than 16 dB throughout the impedance bandwidth. The antenna also provides frequency band rejection of 4.5–5.3 GHz and 7.2–9 GHz covering the WLAN and entire X-band satellite communication. The projected antenna is explored through characteristic mode analysis, time-domain characteristics, and MIMO diversity features to analyze the effectiveness and usefulness of the antenna. The group delay is less than 1 ns except for the frequency rejection band and fidelity factor greater than 0.96. The projected antenna exhibits MIMO diversity metrics ECC < 0.3, DG > 9.6 dB, MEG < −3 dB, TARC < −10 dB, CCL < 0.3 bps/Hz, and ME < −2 dB across the operational frequency, except for the notched bands. The designed two-port antenna is validated by printing on an FR4 substrate. The simulated and measured findings are in line with and appropriate for MIMO wireless applications.
The 5th generation (5G) network was planned to provide a fast, stable, and future-proof mobile communication network to existing society. This research presents a highly compact arc shape structure antenna resonating at 28 GHz for prospective millimeter-wave purposes in the 5G frequency spectrum. The circular monopole antenna is designed with a radius of 1.3 mm. An elliptical slot on the radiating plane aids in achieving an enhanced bandwidth resonating at the frequency of 28 GHz. Including an elliptical slot creates new resonance and helps improve the bandwidth. The antenna has an ultra-compact dimension of 5 × 3 × 1.6 mm3, which corresponds to an electrical length of 0.46λ × 0.28λ × 0.14λ, where λ is free space wavelength at the resonant frequency. The projected antenna has an impedance bandwidth of 15.73 % (25.83–30.24 GHz). The antenna has a good radiation efficiency of 89%, and the average gain is almost 4 dB over the entire impedance bandwidth. The simulated and experimental S11 findings are in good agreement.