Shuang Wang

Dr. Shuang Wang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2025 in Buildings
Verified
Journal Article
Open access
PDF file
SWShuang Wang
Shuang Wang
HLHongqiang Li
Hongqiang Li
XZXiaofeng Zhang
Xiaofeng Zhang
Sawdust is receiving increasing attention as a promising green adsorbent. However, due to its powder nature, it is difficult to recover after adsorbing heavy metals and may even cause secondary pollution. To solve this problem, a novel sawdust/foamed geopolymer (SFG) adsorbent was prepared by using sawdust as a raw material, geopolymer as a binder, and hydrogen peroxide as a foaming agent. This study discussed the effect of SFG dosage, solution temperature, solution pH, contact time, and initial Cu2+ solution concentration on the adsorption capacity and removal rate. The results showed that a desirable SFG adsorbent with the SFG dosage of 0.5 g, temperature of 25 °C, pH of 5, contact time of 720 min, and initial Cu2+ solution concentrations of 90 mg/L is recommended, of which the adsorption capacity is 31.5 mg/g with the removal rate being 92.76%. In addition, the adsorption performance of the SFG adsorbent is superior to that of pure sawdust and similar to that of the foamed geopolymer adsorbent, and it has the characteristics of higher strength, lower cost, and more environmental friendliness. This study indicated that the SFG adsorbents are feasible as adsorbents; meanwhile, this work can provide a scientific reference for the development of new bio-composite adsorbent materials, especially in the field of the treatment of heavy metal ions in wastewater.

6 August 2026 in Buildings
Verified
Journal Article
Open access
PDF file
T王Teng Wang 王
Teng Wang 王
SWShuang Wang
Shuang Wang
ZTZiwei Tong
Ziwei Tong
KLKuhang Li
Kuhang Li
CCChenghan Cai
Chenghan Cai
HLHongqiang Li
Hongqiang Li
The growing demand for low-carbon building materials and the challenges of handling agroforestry waste and discarded EPS particles have spurred research toward developing novel building composites that utilize solid waste. Therefore, this study aims to develop a lightweight geopolymer composite incorporating these recycled materials to balance thermal insulation, mechanical strength, and waterproofing properties. In this work, geopolymer served as the binder, with various types of raw biomass (sawdust, rice husk, rice straw, and coconut fiber) as the primary aggregates and EPS particles as an additive to create a closed-pore structure. The microstructure of the raw biomass was characterized by SEM, while its specific surface area and average pore diameter were determined by BET analysis. Furthermore, the prepared composites were comprehensively evaluated in terms of their microstructure, pore structure (MIP), density, thermal conductivity, compressive strength, total water absorption, capillary water absorption, surface wettability, and UV aging behavior. The results showed that the prepared composites exhibited a porosity of 59.9–65.7%, a density of 492.9–586.3 kg/m3, a compressive strength of 7.3–10.9 MPa, a thermal conductivity of 0.115–0.142 W/(m·K), a total water absorption of 35.2–42.2%, capillary water uptake coefficients of 4.9–11 kg/m2, and a water contact angle exceeding 140° (after modification). In addition, the developed composites offered significant environmental and economic benefits, with a low carbon footprint and an estimated cost of 100.6–150.3 USD/m3, making them more competitive compared to traditional insulation materials. Meanwhile, this study provides a scientific basis for developing high-strength building insulation materials from agroforestry waste, thus outlining a promising direction for future research and industry development.