Yoobsan Ejeta Amensisa

Mr. Yoobsan Ejeta Amensisa

Institute of Technology, Oda Bultum University, Harar, Hārerī Hizb, Ethiopia
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2024 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Yoobsan Ejeta AmensisaYoobsan Ejeta Amensisa
Yoobsan Ejeta Amensisa
HDHundessa Dessalegn Demsash
Hundessa Dessalegn Demsash
MTMuluken Eshetu Tefera
Muluken Eshetu Tefera
Coffee husk (CH) and brewery spent grain (BSG) fibers are sustainable industrial residues that consist of cellulose. The present study aimed at the extraction of cellulose from CH and BSG fibers and to study the effect of alkali-hydrogen peroxide (5% NaOH–7% H2O2) treatment during the extraction by characterizing the extracted cellulose. Characterization of cellulose particles, such as crystallinity, functional groups, thermal properties, and morphology, was conducted by performing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), and scanning electron microscopy (SEM), respectively. The finding shows that the maximum cellulose yields obtained from CH and BSG fibers are 37.3% and 26.5%, respectively. From the XRD results, the cellulose obtained from CH fiber (C-CH) and from BSG fiber (C-BSG) showed diffractive peaks with the highest intensity of approximately 1,003 and 1,236 counted at 2θ = 22°, respectively. A reduction in the absorption of peaks was observed on the FTIR spectrum for both C-BSG and C-CH samples at different wavelengths. SEM demonstrated that the surface roughness of the celluloses was enhanced. TGA showed that the maximum temperature decomposition observed for both C-CH and C-BSG is 360°C and 380°C, respectively. Generally, in this study, alkali-hydrogen peroxide (5% NaOH–7% H2O2) treatment was effectively used for the treatment of BSG and CH fibers for the extraction and surface modification of cellulose particles. The extracted cellulose in the present study can be used as an alternative to conventional cellulose for the manufacturing of biocomposite materials, preparation of particle boards and furniture, and production of food packaging materials.

1 January 2024 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
Yoobsan Ejeta AmensisaYoobsan Ejeta Amensisa
Yoobsan Ejeta Amensisa
HDHundessa Dessalegn Demsash
Hundessa Dessalegn Demsash
MTMuluken Eshetu Tefera
Muluken Eshetu Tefera
The properties of biocomposite materials have been highly affected by the amount of cellulose particles and/or fibers added to the matrix during manufacturing. The objective of this study was to determine the effects of the cellulose loading ratio (CLR) on the fiber‐matrix interfacial bonding of the biocomposite made of extracted celluloses from coffee husk (CH) and brewer’s spent grain (BSG) fibers with recycled post‐consumer low‐density polyethylene (r-LDPE) matrix. The test samples were prepared using the solvent casting method with different CLRs of 10wt.%, 15wt.%, and 20wt.% and abbreviated as BC‐10%, BC‐15%, and BC‐20%, respectively. The study was carried out using the Vickers microhardness test (VMH), thermogravimetric analyzer (TGA), scanning electron microscopy (SEM), and water absorption test. The study findings show that the maximum Vickers hardness value (Hv1) of 17.16 kgf/mm2 was obtained in the BC‐15% composite sample. TGA showed that BC‐10% and BC‐15% exhibited good thermal behavior compared to BC‐20%. Based on SEM microstructure image analysis, moderate fiber‐matrix interfacial bonding was observed. The water absorption test indicated that as the CLR increases, the water absorption rate of the composite samples also increases. In general, an increase in the CLR could influence some principal properties such as hardness, thermal stability, fiber‐matrix compatibility, and water absorption rate of cellulose/r-LDPE biocomposites.

18 December 2025 in Science Journal of Analytical Chemistry
Verified
Journal Article
Open access
PDF file
Yoobsan Ejeta AmensisaYoobsan Ejeta Amensisa
Yoobsan Ejeta Amensisa
BABerhanu Amenu Abdeta
Berhanu Amenu Abdeta
AGAmanuel Ayale Gobosho
Amanuel Ayale Gobosho
MGMizbawu Kanea Gurmu
Mizbawu Kanea Gurmu
This study evaluated the physicochemical quality of two drinking water samples collected from the Addis Ketema borewell and Arba Rakkatte, and designated as AK and AR, respectively, to evaluate their compliance with the World Health Organization (WHO) and Ethiopian Compulsory Standards (ECS) for potable water. Thirteen parameters were analyzed, including pH, total dissolved and suspended solids (TDS and TSS), chemical oxygen demand (COD), total hardness (TH), calcium (Ca), magnesium (Mg), alkalinity, and selected trace metals (Mn, Ni, Fe, and Zn). The results showed that the pH values (6.92–7.01) were within the permissible range, while TDS (470–560mg/L) and TSS (0mg/L) indicated good mineral balance. The COD values were zero, suggesting the absence of organic pollution. However, total hardness values (382.08–418.56mg/L) slightly exceeded the Ethiopian limit (300mg/L), primarily due to high calcium and magnesium concentrations. All trace metal concentrations (Mn, Ni, Fe, Zn) were well below permissible limits, indicating negligible contamination from metallic sources. Overall, both samples met the essential WHO and ECS requirements, except for hardness, which categorizes the water as very hard but not harmful to health. The findings confirm that the water is safe for drinking and household use; nevertheless, mild softening treatment is recommended to improve domestic suitability.

1 January 2025 in Advances in Polymer Technology
Verified
Journal Article
Open access
KHKafi Mohamed Hamed
Kafi Mohamed Hamed
EGERMIAS GIRMA
ERMIAS GIRMA
Mohammed Abdulkedir AlfekiMohammed Abdulkedir Alfeki
Mohammed Abdulkedir Alfeki
Yoobsan Ejeta AmensisaYoobsan Ejeta Amensisa
Yoobsan Ejeta Amensisa
EGEbise Getacho
Ebise Getacho
Highland bamboo is a renewable and sustainable lignocellulosic material abundant in cellulose, making it ideal for a range of industrial applications. This findings aimed to extract cellulose (C) from Ethiopian highland bamboo and combined it with polyvinyl alcohol (PVA) to create biocomposites by means of the solution casting method. Several key properties of the biocomposite samples were analyzed, including water absorption, thermal performance, chemical composition, morphology, biodegradability, and mechanical strength. Biocomposites were produced with various PVA–cellulose (PVA–C) ratios (100/0, 98/2, 96/4, 94/6, and 92/8 wt.%). It was noted that water absorption decreased from 58.9% in pure PVA to 21.59% in the 92/8 PVA/C composite. Thermogravimetric analysis (TGA) revealed that PVA‐reinforced with 6 wt.% C experienced an 80% weight loss between 290 and 380°C. Mechanical testing indicated an increase in tensile strength from 32.18 MPa in pure PVA to 37.60 MPa in the 94/6 PVA/C composite, followed by a reduction to 30.86 MPa. Moreover, the elongation at break fell from 288.72% in pure PVA to 127.25% in the 94/6 PVA/C composite before rising again to 216.75%. Additionally, SEM data show that the generated biocomposite has a strong network structure, suggesting that the cellulose and PVA matrix have strong interfacial contacts. Overall, the findings indicate that the addition of cellulose can improve the mechanical properties, thermal stability, biodegaradability, and water resistance of PVA‐based biocomposites.