Cellulose nanofibril foams are cellulose-based porous materials with outstanding mechanical properties, resulting from the high strength-to-weight ratio of nanofibrils. Here we report the development of an optimized fabrication process for highly porous cellulose foams, based on a well-controlled freeze-thawing-drying (FTD) process at ambient pressure. This process enables the fabrication of foams with ultra-high porosity, up to 99.4%, density of 10 mg/cm3, and liquid (such as oil) absorption capacity of 100 L/kg. The proposed approach is based on the ice-templating of nanocellulose suspension in water, followed by thawing in ethanol and drying at environmental pressures. As such, the proposed fabrication route overcomes one of the major bottle-necks of the classical freeze-drying approach, by eliminating the energy-demanding vacuum drying step required to avoid wet foam collapse upon drying. As a result, the process is simple, environmentally friendly, and easily scalable. Details of the foam development fabrication process and functionalization are thoroughly discussed, highlighting the main parameters affecting the process, e.g., the concentration of nanocellulose and additives used to control the ice nucleation. The foams are also characterized by mechanical tests and oil absorption measurements, which are used to assess the foam absorption capability as well as the foam porosity. Compound water-in-oil drop impact experiments are used to demonstrate the potential of immiscible liquid separation using cellulose foams.
When a drop falls and impacts on a liquid pool, it entraps an air disk below the drop, which then contracts into a central bubble. Here, we use high-speed imaging and high-resolution numerical simulations to characterize the air-disk contraction dynamics for different liquid properties. We show that the air disk can contract into a single central bubble, form a toroidal bubble, or split vertically into two smaller bubbles. We demonstrate that the transitions between the different regimes can be separated by an Ohnesorge number, , based on the air-disk thickness. For the lowest , we find a new regime, where vortex shedding from the rim of the contracting air disk breaks the vertical symmetry and prevents the bubble from splitting in two.
We study experimentally the dynamics of a liquid drop containing an air bubble falling onto a pool of the same liquid. We first develop a drop-on-demand setup capable of forming repeatable compound drops without any surfactant. Then, we investigate the impact dynamics above and below the pool surface combining two high-speed cameras. We identify three different regimes as the impact height increases. At low impact velocities, the bubble is engulfed into the pool. Above a critical impact velocity, the bubble bursts during impact. For higher falling heights, the bubble ruptures before reaching the pool due to air drag decelerating the compound drop.