“Experiments were conducted at DIMEG, University of Calabria, located in the main campus in Arcavacata di Rende, Italy.” This article focuses on the study of the geometry, direct and inverse kinematics, workspace, and singularity of a novel 3-PRRS parallel manipulator (PM) with a redundantly actuated architecture. The PM consists of three active revolute joints and three passive prismatic redundant input joints, all located on a fixed platform. The constant and variable parameters characterizing the PM’s geometry and kinematics are determined. The direct kinematics problem is formulated as a 16th-degree polynomial, while the inverse kinematics problem is solved in closed form. A comparison of the direct and inverse kinematics is provided, and the correctness of the solutions is validated through numerical examples. The equations of motion for the moving platform are derived, and the PM’s workspace is defined based on the inverse kinematics. This work demonstrates how the passive prismatic input joints, specifically included in the design, contribute to an enlarged workspace—particularly in the vertical direction—compared to traditional 3-RRS PM architecture.
This study proposes an approach to 3D modeling of spatial manipulators in the Maple 2023 software environment. Algorithms and program codes have been developed to create computer 3D models of manipulators controlled by generalized coordinates. The implementation of these algorithms and program codes has enabled the creation of three-dimensional computer models of manipulators with clear visual representations of links, their cross-sections, kinematic pairs, grippers, and loads, differing in structure and degrees of freedom while ensuring a comprehensive view from all spatial perspectives. During the motion of the manipulator, complex distributed dynamic loads arise in its links due to their intrinsic masses. These dynamic loads create several challenges: for instance, excessive dynamic loads or significant deformation of the links may lead to failure of the manipulator or a loss of precision in the positioning of the gripper. Such loads significantly impact the design, operation, and reliability of manipulators. The study and understanding of dynamic loads in manipulators are crucial areas in mechanics and robotics, enabling the development of more reliable and efficient systems. The Denavit–Hartenberg method was applied to control the motion of the created computer 3D models of manipulators using generalized coordinates. Using the recursive Newton–Euler equations, the necessary kinematic characteristics of the manipulator’s links were determined for calculating the distributed dynamic loads arising from the intrinsic masses of the links at each cross-section, relative to the local coordinate systems rigidly attached to the links. Algorithms and program codes were developed for controlling the motion of 3D models of manipulators, as well as for constructing visual diagrams of distributed dynamic loads in mutually perpendicular planes, formed by the principal axes of the link cross-sections and the axes passing along the longitudinal axes of the links. The implementation of these algorithms and program codes enabled the generation of distribution diagrams of all dynamic loads in all links of the moving manipulator. These diagrams visually illustrate the changes in direction and magnitude of the distributed dynamic loads in all cross-sections of the links throughout the full cycle of the manipulator’s operation. This allows for the consideration of the identified dynamic loads in the strength and stiffness calculations of the manipulator links, which is essential for the design of new innovative manipulators.
This paper presents a structural–parametric synthesis of the four-link and Stephenson I, Stephenson II, and Stephenson III six-link path-generating mechanisms. The four-link path-generating mechanism is formed by connecting the output point and the base using an active closing kinematic chain (CKC) with two DOFs and a negative CKC of the type RR. The six-link path-generating mechanisms are formed by connecting the output point and the base by active, passive and negative CKCs. Active CKC has active kinematic pair, passive CKC has zero DOF, and negative CKC has a negative DOF. Active and negative CKCs impose geometrical constraints on the movement of the output point, and the geometric parameters of their links are determined by least-square approximation. Geometric parameters of the passive CKC are varied to satisfy the geometrical constraints of the active and negative CKCs. The CKCs of the active, passive and negative types, connecting the output point and the base, are the structural modules from which the different types of the path-generating mechanisms are synthesized. Numerical examples of the parametric synthesis of the four-link and six-link path-generating mechanisms are presented.
Reliable urban air-quality assessment increasingly depends on integrating heterogeneous data sources, yet doing so in data-sparse cities, where reference monitoring is limited and low-cost sensors dominate, remains an open challenge. This study presents a reproducible framework for integrating and analyzing heterogeneous urban sensor data, demonstrated on Almaty, Kazakhstan. Two complementary sources were linked at the station level through a shared identifier: a historical low-cost network of 146 stations (2020–2026; 544,943 records) and a real-time collector providing traffic and source-context features. A three-stage quality-control pipeline retained 442,322 records across 39 stations. Spatial inequality was quantified with complementary indices, attributed to emission sources through geometric descriptors, and used to compare predictive models. Exposure was substantially unequal (winter, seasonally standardized Gini 0.197; full-period Gini 0.210; population-weighted Gini 0.09), with the population-weighted annual mean PM2.5 (19.8 µg/m3) nearly four times the WHO annual guideline (5 µg/m3); virtually the entire population lives in districts whose annual mean exceeds this guideline. The inequality showed a spatial association with position downwind (p = 0.056), reported as exploratory given Almaty’s lack of a consistent prevailing winter wind. On the sparse network, regression failed to predict continuous concentrations (R2 ≈ 0), and once evaluation leakage was removed, classification of high-exposure locations did not exceed a prevalence-aware baseline either (best model 72%, 95% CI overlapping the baseline), indicating that neither task is reliably validated at this network size—a cautionary finding for data-sparse settings generally. The framework provides a transferable template for air-quality assessment in data-scarce urban environments.
30 December 2025 in Bulletin of the National Engineering Academy of the Republic of Kazakhstan
The problem of the structural – kinematical synthesis of the path – generating adjustable spatial mechanisms of the IV class of a kind RRCSSRRS (where R-rotative, C-cylindrical and S-spherical kine-matical pairs ) is considered. It is given by the method of conditional general coordinates the algorithms of the kinematical analysis of the adj ustable spatial mechanisms of the IV class of a kind RRCSSRRS (where R – rotative, C – cylin-drical and S – spherical kinemaric pairs).