21 October 2013 in Journal of Materials Chemistry A
The photonic effect on the photocatalytic activity of the continuous titania inverse opal (TiO2-IO) films differing only by the air sphere size (185 and 165 nm) and prepared by a colloid crystal template approach and annealing at different temperatures (700 and 800 °C) has been investigated by aqueous solution degradation of dye pollutants using mesoporous TiO2 thin films as the reference. The high quality of TiO2 inverse opal films has been confirmed by a blue shift of the Photonic Band Gap (PBG) with increasing light incident angle. Excellent agreement was found between theoretical and experimental reflectance spectra, confirming the photonic crystal structure of the samples. The slow photon light absorption enhancement effect inducing highly improved photocatalytic degradation of dye pollutants has been revealed in an aqueous reaction system. When compared with the mesoporous (m-TiO2) films obtained under the same conditions, all the TiO2-IO films demonstrate a much higher photocatalytic activity. At a light incident angle of 0°, the TiO2-IO-700 film (air sphere size: 185 nm) showed a better photocatalytic activity than that of TIO2-IO-800 (air sphere size: 165 nm). Most importantly, with increasing light incident angle, the photocatalytic activity of the TiO2-IO-700 film decreases whilst that of the TiO2-IO-800 film increases sharply due to the enhancement of light absorption related to a slow photon effect, generating more electron-holes. The present work revealed that photocatalytic activity can be dramatically enhanced by utilizing slow photons located at the PBG edges with energies close to the electronic bandgap of the semiconductor. The study using the slow-photon effect on the basis of photonic crystals to improve the photocatalytic activity by enhancing the light absorption could be an important future research direction. The slow-photon effect can open a new exciting avenue to all the fields related to light absorption including solar cells, optical telecommunications and optical computing.
26 October 2015 in Physical Chemistry Chemical Physics
Enhanced absorption in TiO 2 inverse opals with blue-edge slow photons is explained by loose field confinement in thin TiO 2 skeleton.
31 July 2013 in Journal of Materials Chemistry C
A functional 1D photonic crystal system built from a mesoporous mixed oxide multilayer is proposed that is able to switch from transparent to Bragg reflector states (characterized by a photonic stop band in the visible range) and vice versa by means of adsorption/desorption of liquid in/from the system. One-pot co-condensation of two different precursors enables tailoring of the optical refractive index of inorganic layers by a strict control of pore fraction and the ratio of mixed oxides. Using various templates, 1-hexadecyl trimethylammonium bromide for the low-refractive-index layers and Pluronic P123 for the high-refractive-index layers, an adequate distribution of the pore fraction was obtained. Mixing two oxides with high and low bulk refractive indexes enables tuning of the refractive index contrast between the adjacent layers. When the pores of the system are empty, the light passes through the medium with no reflection thanks to index matching between the layers, which confers to the mesoporous Bragg stack the ability to appear as an effective homogenous medium. The mesoporous Bragg stack has the ability to switch to colored when the pores are filled with water as a result of increasing the refractive index contrast between the layers. This functional multilayer system opens a new range of promising applications of inorganic mesoporous 1D photonic crystals, e.g. as smart coatings for privacy glass windows.
26 May 2016 in Optics Express
Photonic structures encased by a permeable envelope give rise to iridescent blue color in the scales covering the male Hoplia coerulea beetle. This structure comprises a periodic porous multilayer. The color of these scales is known for changing from blue to green upon contact with water despite the presence of the envelope. This optical system has been referred to as a photonic cell due to the role of the envelope that mediates fluid exchanges with the surrounding environment. Following from previously studied liquid-induced changes in the color appearance of H. coerulea, we measured vapor-induced color changes in its appearance. This response to vapor exposure was marked by reflectance redshift and an increase in peak reflectance intensity. Different physico-chemical processes were investigated to explain the increase in reflectance intensity, a property not usually associated with vapor-induced optical signature changes. These simulations indicated the optical response arose from physisorption of a liquid film on the beetle scales followed by liquid penetration through the envelope and the filling of micropores within the body of the photonic structure.
13 January 2016 in Scientific Reports
The structural colour of male Hoplia coerulea beetles is notable for changing from blue to green upon contact with water. In fact, reversible changes in both colour and fluorescence are induced in this beetle by various liquids, although the mechanism has never been fully explained. Changes enacted by water are much faster than those by ethanol, in spite of ethanol’s more rapid spread across the elytral surface. Moreover, the beetle’s photonic structure is enclosed by a thin scale envelope preventing direct contact with the liquid. Here, we note the presence of sodium, potassium and calcium salts in the scale material that mediate the penetration of liquid through putative micropores. The result leads to the novel concept of a “photonic cell”: namely, a biocompatible photonic structure that is encased by a permeable envelope which mediates liquid-induced colour changes in that photonic structure. Engineered photonic cells dispersed in culture media could revolutionize the monitoring of cell-metabolism.
4 January 2022 in Optics Express
SGSarah Griesse-Nascimento
+2
Complete absorption of electromagnetic waves is paramount in today’s applications, ranging from photovoltaics to cross-talk prevention into sensitive devices. In this context, we use a genetic algorithm (GA) strategy to optimize absorption properties of periodic arrays of truncated square-based pyramids made of alternating stacks of metal/dielectric layers. We target ultra-broadband quasi-perfect absorption of normally incident electromagnetic radiations in the visible and near-infrared ranges (wavelength comprised between 420 and 1600 nm). We compare the results one can obtain by considering one, two or three stacks of either Ni, Ti, Al, Cr, Ag, Cu, Au or W for the metal, and poly(methyl methacrylate) (PMMA) for the dielectric. More than 1017 configurations of geometrical parameters are explored and reduced to a few optimal ones. This extensive study shows that Ni/PMMA, Ti/PMMA, Cr/PMMA and W/PMMA provide high-quality solutions with an integrated absorptance higher than 99% over the considered wavelength range, when considering realistic implementation of these ultra-broadband perfect electromagnetic absorbers. Robustness of optimal solutions with respect to geometrical parameters is investigated and local absorption maps are provided. Moreover, we confirm that these optimal solutions maintain quasi-perfect broadband absorption properties over a broad angular range when changing the inclination of the incident radiation. The study also reveals that noble metals (Au, Ag, Cu) do not provide the highest performance for the present application.