Mehran Mohammadian Fazli

Mehran Mohammadian Fazli

Auto-generated profile, based on publicly available information

Mehran Mohammadian Fazli

Department of Environmental Health Engineering, School of Public health, Zanjan University of Medical Sciences, Zanjan, Iran

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2015 in Journal of Environmental Health Science and Engineering
Verified
Journal Article
Open access
PDF file
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
NSNegin Soleimani
Negin Soleimani
MMMohammadreza Mehrasbi
Mohammadreza Mehrasbi
SDSima Darabian
Sima Darabian
JMJamshid Mohammadi
Jamshid Mohammadi
ARAli Ramazani
Ali Ramazani
Background: Soil and effluent of lead and zinc industries contain high concentration of cadmium. The present study was conducted to isolate tolerant fungal strains from cadmium -polluted sites in Zanjan province, Iran. Methods: Cadmium tolerance and bioremediation capacity of seven isolates including Aspergilus versicolor, Aspergillus fumigatus, Paecilomyces sp.9, Paecilomyces sp.G, Terichoderma sp, Microsporum sp,Cladosporium sp were determined. Results: Minimum inhibitory concentration values among 1,000-4,000 mg lˉ1proved great ability of isolated strains to survive in cadmium polluted environments. The most tolerant fungi, Aspergilus versicolor, showed tolerance index of 0.8 in 100 mg lˉ1 cadmium agar media. Fungal resistance against cadmium is depended directly on strain’s biological function. A. versicolor was found to bioaccumulate over7 mg of cadmium per 1 g of mycelium, followed by 5.878, 5.243, and 5.075, 4.557 by Paecilomyces sp, Aspergilus fumigatus, Microsporum sp and Terichoderma sp, respectively. Conclusion: It can be noted that tolerance of the strains appears to be independent from bioaccumulation capacity. Finally, the results indicated that A. versicolor could be a prospective candidate for bioremediation processes.

20 December 2013 in Journal of Environmental Health Science and Engineering
Verified
Journal Article
Open access
PDF file
MBMansour Baziar
Mansour Baziar
MMMohammad Reza Mehrasebi
Mohammad Reza Mehrasebi
AAAli Assadi
Ali Assadi
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
MMMohammad Maroosi
Mohammad Maroosi
FRFooad Rahimi
Fooad Rahimi
Introduction of fuel hydrocarbons and inorganic compounds (heavy metals) into the soil, resulting in a change of the soil quality, which is likely to affect use of the soil or endangering public health and ground water. This study aimed to determine a series of parameters to remediation of TPH and heavy metals contaminated soil by non-ionic surfactants- chelating agents washing process. In this experimental study, the effects of soil washing time, agitation speed, concentration of surfactant, chelating agent and pH on the removal efficiency were studied. The results showed that TPH removal by nonionic surfactants (Tween 80, Brij 35) in optimal condition were 70–80% and 60–65%, respectively. Addition of chelating agent (EDTA) significantly increases Cd and Pb removal. The washing of soil by non- ionic surfactants and EDTA was effective in remediation of TPH and heavy metals from contaminated soil, thus it can be recommended for remediation of contaminated soil.

27 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
AFAli Fathi
Ali Fathi
EAEsrafil Asgari
Esrafil Asgari
HDHossein Danafar
Hossein Danafar
HSHafezeh Salehabadi
Hafezeh Salehabadi
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
Water pollution, particularly from industrial contaminants such as dyes, is a significant global concern. Various technologies, including nanoscale materials, are employed for water and wastewater treatment. Among these, adsorption process as an effective method due to its simplicity, cost-effectiveness, and reliability. This study comprised both theoretical and experimental phases. Initially, computer simulations were utilized to evaluate the interaction between methylene blue and three selected nanoparticles, ultimately choosing Bovine Serum Albumin protein nanoadsorbent based on energy considerations. Subsequently, adsorption experiments were conducted using this nanosorbent. The results indicated a maximum dye removal efficiency of 69% under the conditions of pH 11, an initial dye concentration of 100 mg/L, an adsorbent dose of 0.5 g/L, a contact time of 60 min, and an optimal temperature of 25 °C. The maximum adsorption capacity under optimal conditions was found to be 38.52 mg/g. Additionally, the adsorption isotherm followed the Langmuir equation, and the kinetics adhered to the pseudo-second-order model.

1 February 2019 in Data in Brief
Verified
Journal Article
Open access
MSMohammad Noori Sepehr
Mohammad Noori Sepehr
FAFarideh Allani
Farideh Allani
MZMansur Zarrabi
Mansur Zarrabi
MDMohammad Darvishmotevalli
Mohammad Darvishmotevalli
YVYasser Vasseghian
Yasser Vasseghian
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
In this data article, natural (NL) and manganese oxide-modified LECA (MML) adsorbents were applied for adsorptive removal of Tetracycline (TC) from aqueous solution. The used adsorbents was characterized using fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray fluorescence spectroscopy (XRF). The chemical analysis of XRF data revealed increased chemical composition of Mn as MnO to 8.96 wt%. The SEM patterns were illustrated the extent of surface and enhanced porosity in MML with Mn. In optimum operational conditions, maximum removal percentage of TC was achieved at 51.5 and 99.4% using NL and MML, respectively. The maximum adsorption capacities obtained from Langmuir modeling were 6.89 and 9.24 for NL and MML, respectively. The modeling of the adsorption kinetics revealed that TC adsorption by both NL and MML adsorbents was best-fitted with a pseudo-first-order model (R 2 = 0.978). The isotherm studies of TC adsorption by MML showed that the Freundlich isotherm was the most appropriate model, with a higher coefficient of determination. The obtained data was illustrated that high competitive capacity of chloride and hardness ions compared with other ions against TC adsorption.

1 April 2016 in Desalination and Water Treatment
Verified
Journal Article
Open access
AAAli Assadi
Ali Assadi
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
MEMohammad Mehdi Emamjomeh
Mohammad Mehdi Emamjomeh
MGMaryam Ghasemi
Maryam Ghasemi
Lead removal from aqueous media continues to be an important environmental issue. In this study, a batch system for lead removal from polluted water via electrocoagulation (EC) using an aluminum electrode was evaluated. Box–Behnken design for response surface methodology was applied for modeling and optimizing the effects of main operational variables such as current density, initial pH, and initial lead concentration. According to the ANOVA results, current density and lead concentration have a linear effect, while the pH has a quadratic effect on lead removal efficiency. The high R2 value of 94.12% obtained showed that the experimental data and model predictions agreed well. A removal efficiency of 94% was predicted by the model using the following optimal parameter values: current density of 33 A/m2, pH of 7.25, and lead concentration of 5 mg/L. The results showed that EC is an efficient method for lead removal from aqueous solution.

20 September 2024 in Heliyon
Verified
Journal Article
Open access
FAFateme Ameli
Fateme Ameli
HHHassan Hashemi
Hassan Hashemi
MSMohammad Reza Samaei
Mohammad Reza Samaei
Esrafil AsgariEsrafil Asgari
Esrafil Asgari
MFMehran Mohammadian Fazli
Mehran Mohammadian Fazli
Addressing the urgent need to effectively manage landfill leachate as a harmful flow for human health and the environment, this research investigates how electrocoagulation (EC) processes could alleviate the pollution potential of leachate. So far, no experimental study has been carried out on reducing the leachate pollution index (LPI) under the EC process. For this purpose, in this novel research, the LPI was utilized as a key metric to evaluate the efficiency of the treatment process. Central Composite Design (CCD) as a subset of Response Surface Methodology (RSM) was applied to enhance the LPI parameters decreasing percentage. The data were analyzed by analysis of variance and multivariate regression and 3D plots assessed variable interactions. Under optimal conditions, it showed removal of 97.48 % for COD, 91.42 % for BOD5, 98.52 % for N-NH3, and 91.6 % for TDS. Significant reductions were observed in 94.81 % TKN, 87.20 %, 82.80 %, 96.66 %, and 99.28 %, 99.18 %, and 96.56 % for TKN, Cl−, CN−, As, Cr, Zn, and Ni, respectively. Moreover, the kinetics of COD removal indicated that it follows a first-order model. Thus, based on experimental results, the LPI of raw leachate decreased from 38.06 to 7.22 (81 % decrease) under the EC treatment method. The study indicated that the EC treatment method successfully reduced leachate pollution and met the leachate discharge standard.