Cementite microstructure of the U8 steel with a granular pearlite structure has been investigated by the method of electron microscopy. It has been established that, at the early stages of...
21 February 2013 in Physics of Metals and Metallography
Partial contributions U i to the activation energy for the diffusion of carbon atoms in the Fe3C lattice have been calculated. The U ivalues have been compared upon the migration of carbon atoms in...
15 January 2011 in Physics of Metals and Metallography
The structural evolution upon high-cycle fatigue (tension with the magnitude of stress in a cycle below the macroscopic yield stress) of the hypereutectoid steel U10 (1.03 wt % C), in which pearlite...
18 May 2012 in Physics of Metals and Metallography
Optical metallography and transmission electron microscopy have been used to study the structure of the rolled sheets produced from the pipe steel of Kh90 class. The sheets were manufactured using different technological schemes of strengthening: direct quenching from rolling heating (QRH) followed by high-temperature tempering; and two-step thermomechanical treatment with rapid cooling to a desired temperature (TMT). A relationship between the nature of the structure and mechanical properties of the rolled sheet has been established. It has been shown that the two-step thermomechanical treatment has significant advantages over the quenching from the rolling heating, which is related to the formation of highly dispersed bainite with a subgrain structure upon TMT.
25 May 2013 in Physics of Metals and Metallography
Peculiarities of the bainite structure formed in low-carbon steel 07G2NDMBT during isothermal austenite decomposition, namely, the sizes of crystallites, their mutual orientation, and the presence of cementite precipitates, are considered. The temperature range of the formation of bainite with the subgrain structure was determined. The size of the austenite grain and degree of hot deformation were found to affect the transformation of bainite that occurs upon subsequent cooling and the submicrocrystalline bainite structure. We studied the structure and mechanical properties of a rolled sheet 16 mm thick, which was subjected to thermomechanical treatment (TMT) under plant conditions in accordance with optimum regimes. It was shown that the high structure dispersion of the steel subjected to TMT is due to not only the formation of bainite with the subgrain structure, but also the partial transfer of crystal-structure defects from hot-rolled austenite to the final bainite structure.