9 July 2021 in IEEE Signal Processing Letters
In this letter, we proposed a novel unsupervised learning strategy for direction-of-arrival (DOA) estimation network. Inspired by the sparse power spectrum and $\ell_1$ -norm optimization, we develop a novel loss function to cooperate with the estimation network. Unlike the prior DL-based methods, the proposed method does not need any manual annotations for training and validation datasets. Compared with state-of-art methods, the proposed method can automatically increase the degree of freedom of the array without further pre-processing on the covariance matrix of array observation data. Moreover, the proposed method can obtain clear spectrum and precise DOAs under harsh estimation environments without any time-consuming problem.
27 December 2018 in IEEE Antennas and Wireless Propagation Letters
A miniaturized dual-bandstop frequency selective surface (FSS) using convoluted structures is proposed. The working central frequencies of the proposed FSS are 2.66 GHz and 5GHz with -0.5dB bandwidths of 0.6 GHz and 0.5 GHz respectively. The size of the unit cell is 6.88mm which is about 5.9% of the wavelength at the first working frequency. The equivalent circuit and current distributions are introduced to explain the FSS frequency performance. A prototype of the proposed FSS is fabricated and measured. The simulation and measured results show that the working frequencies, the bandwidths of the passband and two stopbands of the the proposed FSS have excellent stabilities under different polarizations and incidence angles. This FSS is a good candidate to isolate the wireless networks.
9 November 2018 in IEEE Antennas and Wireless Propagation Letters
In this letter, an frequency selective surface(FSS) structure by combining parallel LC resonators is proposed to achieve wideband performance. The metal vias are used to connect top layer and bottom layer so that the equivalent element in the circuit can be enlarged or minished. The metal vias minimize the unit size greatly which achieves 0.0624 $\lambda$ . The bandpass performances of TE and TM polarizations are achieved by different parts- $S_{TE}$ and $S_{TM}$ and the structure is further miniaturized by making cross with $S_{TE}$ and $S_{TM}$ . The FSS has steep roll-offs at the edges of the passband according to the simulated results.The prototype of the proposed FSS is manufactured and tested. The measured -3dB bandwidth is from 1.3GHz and 4GHz, its relative bandwidth can achieve 110%. The thickness of the proposed FSS is 0.254mm. The measured results show the proposed FSS has better polarization and incident angle stabilities compared with other FSSs. This FSS is a good candidate to strengthen the detectivity performance of S-band active radar and isolate communication system.
13 April 2017 in AEU - International Journal of Electronics and Communications