23 April 2018 in Nanoscale
We have developed the floating catalyst chemical vapor deposition (FCCVD) synthesis of single walled carbon nanotubes (SWCNTs) using C2H4 hydrocarbon as a carbon source and iron nanoparticles as the catalyst in an environmentally friendly and economical process. For the first time, ethylene was used as the only carbon source in FCCVD with N2 as the main carrier gas. No sulphur and less than 15% H2 in a N2 carrier gas were used. By varying the ferrocene concentration, the diameter of the SWCNTs was tuned in the range of 1.3–1.5 nm with the optimized control of ferrocene concentration. The process produced SWCNTs with an average length of 13 μm and with a low level of bundling, that is a high proportion (28%) of individual tubes. The electron diffraction (ED) pattern indicated a random chirality distribution of the tubes between armchair and zigzag structures. The ED analysis also revealed that 35–38% of tubes are metallic. As a result of having long SWCNTs with a low level of bundling and a high fraction of metallic tubes, we produced a highly conductive transparent film with a sheet resistance of 51 Ohm per sq. for 90% transmission at 550 nm after HNO3 treatment, this being one of the lowest sheet resistance values reported for SWCNT thin films.
23 September 2021 in Advanced Functional Materials
The floating catalyst chemical vapor deposition (FCCVD) method for producing single‐walled carbon nanotubes (SWNTs) has demonstrated great potential in transparent conductive film (TCF) application. In FCCVD, reducing the concentration of carbon nanotubes (CNTs) is a well‐agreed method of improving the conductivity of SWNT TCF, achieved by producing thinner and longer CNT bundles. However, this method decreases the yield dramatically, which has persisted throughout the TCF development. Here, the production of large‐diameter double‐walled CNT (DWNT) TCFs via FCCVD is reported, which overcomes the tradeoff between performance and yield. These TCFs of DWNTs with an average diameter of ≈4 nm have a low sheet resistance of 35 Ω sq−1 at 90% transmittance. The conductivity here aligns with the best‐performing SWNT TCFs reported to date, showing a production yield greater than two orders of magnitude. The main factor contributing to the high performance and yield is considered to be the large tube diameter, which greatly improves the yield threshold of CNT bundling and leads to long tube length and unique junctions broadening. Moreover, the application of DWNT TCFs in perovskite solar cells exhibits a power conversion efficiency of 17.4%, which has not been reported yet in indium‐free CNT‐based solar cells.
27 November 2017 in Topics in Current Chemistry
10 December 2019 in Nano Research
Single-walled carbon nanotube (SWCNT) transparent conducting films (TCFs) are attracting increasing attention due to their exceptional optoelectronic properties. Toluene is a proposed carbon source for SWCNT synthesis, but the growth parameters of SWCNTs and their TCF optoelectronic performance (i.e., sheet resistance versus transmittance) have been insufficiently evaluated. Here, we have for the first time reported a systematic study of the fabrication of high-performance SWCNT TCFs using toluene alone as the carbon source. The mechanisms behind each observed phenomenon were elucidated using optical and microscopy techniques. By optimizing the growth parameters, high yields of SWCNT TCFs exhibiting a considerably low sheet resistance of 57 Ω/sq at 90% transmittance were obtained. This competitive optoelectronic performance is mainly attributable to long SWCNT bundles (mean length is 41.4 μm) in the film. Additionally, a chirality map determined by electron diffraction displays a bimodal distribution of chiral angles divided at 15°, which is close to both armchair and zigzag edges. Our study paved the way towards scaled-up production of SWCNTs for the fabrication of high-performance TCFs for industrial applications.
9 September 2019 in ACS Nano