1 May 2011 in KSCE Journal of Civil Engineering
In this paper, we propose a system combining various methods for monitoring leakage of underground pipelines. The system uses a wireless connection for communications and uses acoustic emission effects to detect and locate leakages. The system is easily deployed, with a flexible configuration that requires less maintenance because a wireless connection is used. Moreover, the system is accurate, simple, and inexpensive, because it is based on acoustic emissions. Experiments determining the wireless connectivity of the proposed system are also presented.
25 September 2017 in KSCE Journal of Civil Engineering
Tunnel drainage systems require regular maintenance to reduce the amount of calcite deposits, which can eventually obstruct the effluent and cause deterioration to the pipe lining. Current maintenance methods have high energy consumption and often result in pipe damage due to pipe blockage or solidified contaminants. In this study, the effectiveness of vibrations from a film type transducer in improving the cleaning efficiency of tunnel drainage systems was investigated. Our findings suggest that the vibrations produced by the transducer affected the shear resistance of the adherent contaminants in the drainage pipe. By reducing the shear resistance of sedimentous contaminants, drainage pipe maintenance can become more energy efficient. This study aims to provide data for the implementation of field applications of piezoelectric transducers for drainage systems.
26 October 2016 in KSCE Journal of Civil Engineering
Through a series of laboratory tests, an investigation was conducted into the reduction of shear resistance of scale in tunnel drainage through the use of wave energy. A flexible transducer was used to generate vibration and emitted it through a polyvinylidene fluoride polymer film as various frequencies. Tests were conducted using specially designed and fabricated equipment. The results of the study showed a significant decrease in shear resistance when sonication was applied. The degree of reduction varied by frequency. Using the test results, we discuss the potential development of a new maintenance system method for drainage.
1 March 2013 in KSCE Journal of Civil Engineering
Pressure grouting has gained popularity as a soil reinforcement method. However, the behavior of the interface between rock and grout is not well known. This study investigates the interaction of pressure grouting and rock, through a series of laboratory tests performed on specially designed and fabricated equipment and using standard testing methods. The test measures the density, compressional strength, and frictional resistance of grout relative to the applied pressure and curing time. Simultaneously, the velocities of the elastic wave traveling through the grout are obtained to develop correlations between the physical properties of the grout and the test conditions. The results of the tests show that the density, compressional strength, and frictional resistance of the grout increase with applied pressure and curing time. The strengths of the influencing factors are seen to be correlated within the range of the test conditions. Using the results of these tests, the potential development of a new method that requires less cement was discussed.
1 September 2015 in KSCE Journal of Civil Engineering
The use of ultrasound to enhance the physical properties of cement grout was investigated with a series of laboratory tests. Test conditions included power and duration of sonic energy and curing time. Results indicated that the use of ultrasound in the grout mixing process significantly enhanced the uniaxial compressive strength. A visible decrease in the viscosity of liquid grout was also observed. The degree of enhancement varied with sonication energy, treatment time, and curing duration.
1 May 2013 in KSCE Journal of Civil Engineering
It has been noted that the discharge capacity of an installed vertical drain rapidly decreases with consolidation mainly due to flow area reduction and bending and/or kinking of the drain. To solve these two problems, this study attempts to develop the “Deformation-Compatible Vertical Drain (DCVD)”, with a new concept of replacing the existing stiff core with a spring structure. A modified triaxial test was conducted to investigate whether DCVD can solve the problem of flow area reduction. A centrifuge model test was conducted to investigate the deformation compatible function of the DCVD, as it interacts with the ground settlement and deforms in a vertical direction only. Lastly, a pilot-scale chamber test was carried out to evaluate the performance and adaptability of DCVD when applying it in the field. The results of three experimental tests demonstrate that DCVD does not show the bending and kinking of the drain even at a large ground settlement, and that it secures the flow area even at a high lateral pressure. Finally, it is considered that if the DCVD designed in this study is produced using the proper materials, the two problems observed in the existing vertical drains can be solved.