20 May 2014 in GPS Solutions
In order to enhance the tracking performance of global positioning system (GPS) receivers for weak signal applications under high-dynamic conditions, a high-sensitivity and high-dynamic carrier-tracking loop is designed. The high-dynamic performance is achieved by aiding from a strapdown inertial navigation system (SINS). In weak signal conditions, a dynamic-division fast Fourier transform (FFT)-based tracking algorithm is proposed to improve the sensitivity of GPS receivers. To achieve the best performance, the tracking loop is designed to run either in the conventional SINS-aided phase lock loop mode (time domain) or in the frequency-domain-tracking mode according to the carrier-to-noise spectral density ratio detected in real time. In the frequency-domain-tracking mode, the proposed dynamic-division FFT algorithm is utilized to estimate and correct the error of the SINS aiding. Furthermore, the optimal values of the dynamic-division step and the FFT size are selected to maximize the signal-to-noise ratio gain. Simulation results demonstrate that the designed loop can significantly improve the tracking sensitivity and robustness for weak GPS signals without compromising the dynamic performance.
5 August 2016 in GPS Solutions
In vector tracking loop (VTL), the relativity among received signals is exploited to deeply integrate the entire information within signal processing channels. However, the tracking error in one channel may corrupt other channels and lead to an increasing degradation in the tracking performance. An adaptive GPS vector tracking loop with the detection and isolation of contaminated channels is proposed to suppress the propagation of tracking error and to make the vector-based receiver less vulnerable in poor signal quality environments resulting from signal attenuation, interference and jamming. The vectorial transfer function models and the noise bandwidths of both the vector frequency lock loop and the vector delay lock loop are established to accurately calculate bandwidths and optimally design parameters for VTL. The autonomous fault detection algorithm based on uniformly most powerful test for VTL is designed to detect and isolate contaminated channels (with large tracking error due to the poor signal quality) by monitoring the bandwidth statistics of all tracking loops. The results of trials in harsh situations show that the proposed adaptive VTL is superior to baseline VTL, allowing the accuracy, the availability and the reliability of the vector-based receiver to be improved. In conclusion, the proposed adaptive VTL with the detection and isolation of contaminated channels is a powerful method for applications in GPS-challenged environments.
17 April 2013 in GPS Solutions
12 July 2018 in Journal of Navigation
In order to utilise the position and attitude information of a Celestial Navigation System (CNS) to aid a Strapdown Inertial Navigation System (SINS) and make it possible to achieve long-range and high-precision navigation, a new SINS/CNS integrated navigation scheme based on overall optimal correction is proposed. Firstly, the optimal installation angle of the star sensor is acquired according to the geometric relationship between the refraction stars area and the star sensor's visual field. Secondly, an analytical method to determine position and horizontal reference is introduced. Thirdly, the mathematical model of the SINS/CNS integrated navigation system is established. Finally, some simulations are carried out to compare the navigation performance of the proposed SINS/CNS integrated scheme with that of the traditional gyro-drift-corrected integration scheme. Simulation results indicate that in the proposed scheme, without the aid of SINS, CNS can provide attitude and position information and the errors of the SINS are able to be estimated and corrected efficiently. Therefore, the navigation performance of the proposed SINS/CNS scheme is superior to that of a more traditional scheme in long-range flight.
3 January 2024 in Advances In Space Research
24 April 2024 in Measurement Science and Technology
With the increasing demand for high-accuracy navigation, distributed payloads put forward higher requirements for the initial alignment accuracy of their equipped slave inertial navigation systems (INSs). However, the existing transfer alignment models have poor compensation effect on flexible deformation, resulting in low alignment accuracy. Moreover, these models cannot accurately evaluate the accuracy of transfer alignment due to ignoring the errors of the master INS. To address these two problems, a new high-accuracy transfer alignment system model is established by comprehensively considering errors of the master and slave INSs. Further, the propagation characteristics of the master and slave inertial sensor errors in transfer alignment are analyzed, and the relationship expression between the master and slave inertial sensor accuracy and the transfer alignment accuracy is derived. Thus, the accuracy of transfer alignment can be pre-evaluated according to the master and slave inertial sensor accuracy. The experiment results show that the alignment accuracy of the proposed method is improved by more than 71.56% compared with the traditional methods, and the relative errors between the proposed accuracy evaluation method and the Monte Carlo simulations are less than 9.14%. Thus, the correctness, effectiveness and superiority of the proposed method are verified.