24 June 2010 in Nanoscale
Recently, one-dimensional (1D) ZnO nanomaterials (NMs) have been extensively studied because both their functional properties and highly controllable morphology make them important building blocks for understanding nanoscale phenomena and realizing nanoscale devices. Compared with high temperature (>450 °C) vapor phase methods, solution-based synthesis methods can be conducted at low temperatures (25–200 °C) allowing for compatibility with many organic substrate materials and offer additional advantages such as straightforward processing, low cost, and ease of scale up. Although there exist several review articles in the literature regarding the synthesis and applications of 1D ZnO NMs, those focusing on solution-based synthesis methods are lacking. Thus, this review focuses mainly on 1D ZnO NMs synthesized by solution-based processing. Firstly, 1D ZnO non-patterned, nanoparticle-seeded synthesis and its associated solution growth kinetics are discussed. Next, synthesis of vertically-aligned ZnO nanorod arrays with controlled pattern and density on various substrates is reviewed. Finally, important applications of 1D ZnO NMs are highlighted including sensors, field emission devices, photodetectors, optical switches, and solar cells.
27 February 2013 in BioEnergy Research
19 November 2007 in Biotechnology and Bioengineering
10 May 2010 in The Journal of Physical Chemistry C
13 April 2012 in Journal of Materials Chemistry
For the first time, we demonstrated that compressed aerogels made from crosslinked native cellulose nano/micro-fibril cellulose (NFC/MFC) show a fast shape recovery property after being immersed in water. The shape recovery degree in other solvents was also measured by the volume change of compressed aerogels. It was also found that the recovery degree strongly depends on the solvent properties. For water, more than 98% of the original shape was recovered in less than 10 s. However, only about 18% of its original shape was recovered by immersing the compressed aerogel in ethanol, and no shape recovery was observed by immersing in a nonpolar solvent, such as toluene. The crosslinked native NFC/MFC network is strong enough to withstand hot water and mechanical agitation (200 rpm mechanical stirring in water). The possible mechanism of shape and volume recovery of compressed NCF/MCF aerogel is discussed.
14 August 2017 in Scientific Reports
Pure cellulose nanocrystal (CNC) aerogels with controlled 3D structures and inner pore architecture are printed using the direct ink write (DIW) technique. While traditional cellulosic aerogel processing approaches lack the ability to easily fabricate complete aerogel structures, DIW 3D printing followed by freeze drying can overcome this shortcoming and can produce CNC aerogels with minimal structural shrinkage or damage. The resultant products have great potential in applications such as tissue scaffold templates, drug delivery, packaging, etc., due to their inherent sustainability, biocompatibility, and biodegradability. Various 3D structures are successfully printed without support material, and the print quality can be improved with increasing CNC concentration and printing resolution. Dual pore CNC aerogel scaffolds are also successfully printed, where the customizable 3D structure and inner pore architecture can potentially enable advance CNC scaffold designs suited for specific cell integration requirements.