Lithium–sulfur batteries are strongly expected to be the next-generation energy storage technology due to their superior theoretical specific capacity and energy density. However, the low conductivity of sulfur and the discharge species (Li2S2, Li2S), the “shuttle” issue of soluble intermediates, and the large volume change hinder their further practical application. In this study, vanadium dioxide (VO2) was successfully grown on reduced graphene oxide (rGO) surface via a one-step rapid and facile solvothermal method, and named as the VO2@rGO binary host. In this structure, the VO2 nanoflakes displayed intensive chemical adsorption for polar lithium polysulfide species (LiPSs), accelerating the conversion of long-chain LiPSs to Li2S2/Li2S discharge products and thus suppressing the shuttling of soluble LiPSs. Additionally, rGO could ensure good electronic conductivity of the sulfur cathode and significantly enhanced the electrochemical reaction kinetics. Particularly, the VO2@rGO/S cathode demonstrated a high initial discharge capacity of 1358 mA h g−1 at 0.2C and retained a stable cycling performance with a reversible capacity of 1049 mA h g−1 over 370 cycles (low capacity decay of 0.06% per cycle). Such excellent performance revealed its good potential for use in advanced lithium–sulfur batteries.
A great challenge for electrochemical CO2 reduction is to improve energy efficiency, which requires reducing overpotential while increasing product Faraday efficiency. Here, we designedly synthesize a hybrid electrocatalyst consisting of Fe nanoparticles, pyrrole-type Fe-N4 sites and less-oxygenated carbon supports, which exhibits a remarkable CO Faraday efficiency above 99% at an ultralow overpotential of 21 mV, reaching the highest cathode energy efficiency of 97.1% to date. The catalyst also can afford a CO selectivity nearly 100% with a high cathode energy efficiency (>90%) at least 100 h. The combined results of control experiments, in situ characterizations and theoretical calculations demonstrate that introducing Fe nanoparticles can reduce the overpotential by accelerating the proton transfer from CO2 to *COOH and lowering the free energy for *COOH formation, constructing pyrrole-type Fe-N4 sites and limiting oxygen species on carbon supports can increase CO Faraday efficiency through inhibiting the H2 evolution, thus achieving energy-efficient electrochemical CO2 reduction to CO.
1 November 2021 in Applied Catalysis B: Environment and Energy
Developing efficient non-noble-metal electrocatalysts for overall water-splitting is still a great challenge for future renewable energy conversion and storage systems. Herein, cross-linked Al-doped CoP nanosheets on three-dimensional (3D) nickel foam (Al-CoP/NF) are synthesized by a simple low-temperature phosphidation method using a CoAl layer double hydroxide precursor and exhibit high activity and good stability towards the hydrogen evolution reaction (HER) at all pH values, with low overpotentials of 51 mV (0.5 M H2SO4, pH = 0), 66 mV (1.0 M KOH, pH = 14) and 83 mV (1.0 M PBS, pH = 7) to achieve a current density of 10 mA cm−2. In addition, this self-supported electrode shows excellent activity towards the oxygen evolution reaction (OER) in alkaline media, affording an anodic current density of 10 mA cm−2 at an overpotential of 330 mV. As a result, Al-CoP/NF as a bifunctional electrocatalyst can afford a current density of 10 mA cm−2 at a cell voltage of 1.63 V over a long-term overall water splitting operation in 1.0 M KOH. The remarkable catalytic performance of the self-supported Al-CoP/NF is closely associated with its outstanding structural advantages such as a 3D conductive framework, fascinating porous characteristics and Al doping. This study might open up a new route to improve the activity and durability of self-supported electrocatalysts by heteroatom doping.
1 December 2017 in Journal of Colloid and Interface Science