Dimitrios Peroulis

Dimitrios Peroulis

Auto-generated profile, based on publicly available information

Dimitrios Peroulis

Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, USA

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2024 in Nature Communications
Verified
Journal Article
Open access
PDF file
TJThomas R. Jones
Thomas R. Jones
Alexander KildishevAlexander Kildishev
Alexander Kildishev
MSMordechai Segev
Mordechai Segev
DPDimitrios Peroulis
Dimitrios Peroulis
When an electromagnetic (EM) wave propagates in a medium whose properties are varied abruptly in time, the wave experiences refractions and reflections known as time-refractions and time-reflections, both manifesting spectral translation as a consequence of the abrupt change of the medium and the conservation of momentum. However, while the time-refracted wave continues to propagate with the same wave-vector, the time-reflected wave propagates backward with a conjugate phase despite the lack of any spatial interface. Importantly, while time-refraction is always significant, observing time-reflection poses a major challenge – because it requires a large change in the medium occurring within a single cycle of the EM wave. For that reason, time-reflection of EM waves was observed only recently. Here, we present the observation of microwave pulses at the highest frequency ever observed (0.59 GHz), and the experimental evidence of the phase-conjugation nature of time-reflected waves. Our experiments are carried out in a periodically-loaded microstrip line with optically-controlled picosecond-switchable photodiodes. Our system paves the way to the experimental realization of Photonic Time-Crystals at GHz frequencies.

28 January 2013 in IEEE Microwave Magazine
Verified
Journal Article
Closed access
PBPierre Blondy
Pierre Blondy
DPDimitrios Peroulis
Dimitrios Peroulis
RF-MEMS technology permits practical implementations of high-Q (Q from 300 to over 1,000) tunable microwave filters with power handling in the >;1-10 W range, with significant tuning range (>;50% to 100%), and ultra-low power consumption. Continuously frequency-tunable filters with mechanical actuation in the opposite direction of RF-inducted pressure can reach powers up to several watts, using a variable compensation bias. Very high Q, and large tuning range can be achieved with this technology, both in planar and cavity tunable filters. Using several devices in parallel, RF-MEMS capacitor arrays can handle RF-powers better than 1 watt, without the need for any compensation tuning.

22 January 2008 in Nonlinear Dynamics
Verified
Journal Article
Closed access
PDF file
AVAshwin Vyas
Ashwin Vyas
DPDimitrios Peroulis
Dimitrios Peroulis
ABAnil K. Bajaj
Anil K. Bajaj

12 July 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DPDimitra Psychogiou
Dimitra Psychogiou
RGRoberto Gomez-Garcia
Roberto Gomez-Garcia
DPDimitrios Peroulis
Dimitrios Peroulis
A class of RF multi-functional bandpass filter with multiple frequency-reconfigurable rejected bands that are embedded into its broad transmission frequency range is reported. This filter concept exploits an original tunable multi-band quasi-bandstop section as constituent block. In this manner, unprecedented levels of spectral adaptivity are obtained for its in-band notches. Among them: 1) independent control of center frequency and rejection level; 2) notch-combination capability to conform wider rejected bands and make their number dynamically selectable; and 3) generation of dual-band bandpass responses with adjustable bandwidth and inter-band transmission zeros. This results in controllable in-band stopbands with reconfigurable bandwidth, attenuation level, and filtering-profile type. The devised filter architecture, which is appropriate for dynamic multi-interference mitigation in broad-band RF receivers, is scalable to any number of arbitrary-order in-band notches. For proof-of-concept purposes, a UHF-band microstrip prototype with up to two tunable in-band second-order stopbands is manufactured and measured.

3 November 2016 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
DPDimitra Psychogiou
Dimitra Psychogiou
RGRoberto Gomez-Garcia
Roberto Gomez-Garcia
DPDimitrios Peroulis
Dimitrios Peroulis
New types of single- and multiband acoustic-wave resonator-based bandpass filters (BPFs) with continuously variable transfer function in terms of bandwidth (BW), selectivity, and out-of-band isolation (IS) are presented. They are based on single-/multiband resonant branches that are shaped by high-quality-factor (Q) acoustic-wave-lumped-element resonators (AWLRs) and are connected in parallel to an all-pass network through variable impedance inverters. With the proposed configuration, quasi-elliptic-type passbands with wide fractional BWs (FBWs)-i.e., larger than the electromechanical coupling coefficient k²t of its constituent acoustic-wave resonator-can be realized and continuously tuned while preserving the high-Q characteristics of its acoustic-wave resonators. Furthermore, by reconfiguring the location of the transmission zeros (TZs) of the AWLRs, tunable out-of-band IS profiles and asymmetrical passband BWs can be created. The operating principles of the devised spectrally agile filter concept are demonstrated through coupling-matrix-based synthesis and linear-circuit simulations. They are experimentally validated at the UHF band through the realization of: 1) a three-pole/six-TZ single-band prototype at 418 MHz with tunable BW between 0.16 and 0.49 MHz (FBW: 0.5-1.5k²t) for an insertion loss (IL) between 3.3 and 1.2 dB (i.e., effective Q > 10,000), reconfigurable order (first-to-third-order states), out-of-band IS controllability in terms of BW (18-26.5 MHz at the upper stopband) and magnitude (23-46 dB at 426 MHz), and an intrinsically selectable all-pass mode and 2) a six-pole/nine-TZ dual-band BPF with two transmission bands located at 418 and 433.9 MHz. They, respectively, feature symmetrical and asymmetrical BW tuning between 0.3-0.54 and 0.6-1.23 MHz with in-band IL <1.7 dB for all tunable states.

23 November 2016 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MKMohammad Abu Khater
Mohammad Abu Khater
YWYu-Chen Wu
Yu-Chen Wu
DPDimitrios Peroulis
Dimitrios Peroulis
This paper presents, for the first time, an automatically tunable diplexer using evanescent-mode cavity filters, with spectrum-aware and interference mitigation capabilities. The diplexer consists of two second-order bandpass filters and a bandstop filter (BSF) at the receiving path. The BSF is utilized in a spectrum sensing methodology to detect potential jammers. The automatic tuning system monitors each resonator in the diplexer and biases them to accurately reach the targeted frequency accordingly. The presented diplexer presents a measured tuning range 0.75-1 GHz, with an insertion loss (IL) of less than 3.7 dB in the receive path and 2.2 dB in the transmit path and a tuning resolution of ~0.05%. The closed-feedback loop tuning time, which accounts for all mechanical and electrical time constants, is around 250 ms. The spectrum sensing capability has been experimentally demonstrated to detect a jammer. Automatic diplexer tuning results in a total jammer suppression of 30 dB with 33-MHz transmit-receive separation. Further rejection of up to ~50 dB can be achieved for higher separations. The automatic tuning control system is also analyzed for stability.