11 July 2016 in Superconductor Science and Technology
2 January 2023 in Applied Physics Letters
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 Ω environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250–300 MHz with input saturation powers up to −95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimation of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Finally, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs.
1 June 2013 in Electronics Letters
A resistive switching behaviour of printed, flexible Cu/CuO/(AgO)/Ag memristor devices is demonstrated for the first time. It is suggested that the high resistance state and low resistance state of bipolar resistive switching behaviour are governed by the migration of oxygen between the copper oxide and silver oxide layers. The devices have characteristics of inexpensive low‐temperature fabrication, low‐power operation and no required electroforming process. Ink‐jet printing was used to fabricate the devices on polymer substrates. Since these devices are fabricated on flexible polyimide, they have compatibility with flexible electronic technologies.
10 January 2019 in IEEE Transactions on Applied Superconductivity
Superconducting circuits based on quantum phase-slip junctions (QPSJs) can conduct quantized charge pulses, which naturally resemble action potentials generated by biological neurons. A corresponding synaptic circuit, which works as a weighted connection between two neurons, can also be realized by circuits comprised of QPSJs and magnetic Josephson junctions (MJJs) as a means of charge modulation for quantized charge propagation. In this paper, we present basic neuromorphic computing circuitry components, such as neuron and synaptic circuits, based on superconducting QPSJs and MJJs. Using a SPICE model developed for QPSJs, neuron and synaptic circuits were simulated in WRSPICE to demonstrate possible operation. We provide estimates for QPSJ energy dissipation and operation speed based on calculations using simple models. Some of the challenges for implementation of this technology are also briefly discussed.