Huachun Wu

Prof. Dr. Huachun Wu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2018 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
SRShaolin Ran
Shaolin Ran
YHYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
Recently, magnetic bearings have been applied to many rotating machines such as turbo-molecular pumps, cooling gas compressor, flywheel energy storage systems. And high-power density is the future development trend of these machines, which demands that the rotor characterizes slender and high rotating speed and operates above the critical speeds. However, it is a big challenge for a flexible rotor to pass the bending critical speeds and operate above the critical speeds steadily and reliably. Based on above reasons, this article presented the design, modeling, and analysis framework of a flexible rotor test rig with active magnetic bearing (AMB). Special attention was paid to the flexible rotor dynamic model development, dynamic analysis, and model-based robust control design. First, the main structure features were illustrated in detail, including the key dimensions and parameters of the AMB components and rotor. Then models of components including power amplifier and displacement sensor were developed. The finite element method based on Timoshenko beam theory was applied to the rotor dynamics model. The dynamic analysis of the rotor is the foundation of the controller design. Hence, modal analysis had been done, obtaining rotor dynamic properties via synthesis of natural frequency, mode shapes, and Campbell plots. Reduced order model was obtained for controller design convenience. A robust H∞ controller was designed based on the system model and controller performance was validated with numerical simulation. The results indicate that the controller has good vibration suppression performance and makes the flexible rotor pass the first bending critical speed.

27 September 2017 in Energies
Verified
Journal Article
Open access
PDF file
MAMesfin Belayneh Ageze
Mesfin Belayneh Ageze
YHYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
The current trends of wind turbine blade designs are geared towards a longer and slender blade with high flexibility, exhibiting complex aeroelastic loadings and instability issues, including flutter; in this regard, fluid-structure interaction (FSI) plays a significant role. The present article will conduct a comparative study between uni-directional and bi-directional fluid-structural coupling models for a horizontal axis wind turbine. A full-scale, geometric copy of the NREL 5MW blade with simplified material distribution is considered for simulation. Analytical formulations of the governing relations with appropriate approximation are highlighted, including turbulence model, i.e., Shear Stress Transport (SST) k-ω. These analytical relations are implemented using Multiphysics package ANSYS employing Fluent module (Computational Fluid Dynamics (CFD)-based solver) for the fluid domain and Transient Structural module (Finite Element Analysis-based solver) for the structural domain. ANSYS system coupling module also is configured to model the two fluid-structure coupling methods. The rated operational condition of the blade for a full cycle rotation is considered as a comparison domain. In the bi-directional coupling model, the structural deformation alters the angle of attack from the designed values, and by extension the flow pattern along the blade span; furthermore, the tip deflection keeps fluctuating whilst it tends to stabilize in the uni-directional coupling model.

1 January 2017 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
PDF file
MAMesfin Belayneh Ageze
Mesfin Belayneh Ageze
YHYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
The interaction of fluid flow and the structure dynamic of the system is a vital subject for machines operating under their coupling. It is not different for wind turbine either, especially as the coupling enhanced for multi-MW turbine with larger and flexible blades and complex control methods, and other nonlinearity, more comprehensive aeroelastic tools will be required to investigate the realistic phenomena. The present paper will overview the aeroelastic tool for wind turbine, the efforts done, gaps, and future directions indicated. One starts with background of the subject, presenting a case study to demonstrate the effect of fluid-structure interaction considering NREL 5MW blade and a brief comparison of several aeroelastic codes. Cutting edge efforts done in the area such as complex inflow, effect of geometric nonlinearity, and other stability and smart control issues are addressed and concluded by elaborating the gaps and future direction of aeroelasticity of wind turbine.

6 January 2023 in Actuators
Verified
Journal Article
Open access
PDF file
QLQiang Li
Qiang Li
Yefa HuYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
According to different working environments and functional requirements, radial magnetic bearings (RMBs) have various design methods. Some methods’ lack of effectiveness or accuracy is likely to cause significant differences in the structural performance of magnetic bearings, which will cause serious problems such as limited bearing capacity and complex control. This paper analyzes the structure topology of a magnetic bearing according to the application scenario of RMBs, then proposes a general design example of an 8-pole magnetic bearing based on magnetic circuit analysis and reveals the linearity between electromagnetic force and current as well as air gap through finite element analysis and the influence of magnetic saturation on the load capacity of the magnetic bearing structure. After completing the preliminary design, we further optimize the structure, take the genetic algorithm as an example to iterate the influence coefficient, and summarize and prospect. The design scheme and optimization method proposed in this paper only provide a valuable reference for researchers and factories when devising RMB devices.

19 December 2018 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
SRShaolin Ran
Shaolin Ran
YHYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
XCXin Cheng
Xin Cheng
The resonance vibration control of flexible rotor supported on active magnetic bearings (AMB) is a challenging issue in the industrial applications. This work addresses the application of robust control method to the resonance vibration control for AMB flexible rotor while passing through the critical speed. This model-based method shows great superiority to handling flexible mode vibration, which can guarantee robust stability and performance when encountering modal perturbation. First, the designed flexible rotor-AMB test rig is briefly introduced. Then the system modeling is described in detail including flexible rotor, power amplifier, displacement sensors and magnetic actuator and rotordynamics are analyzed. Model validation is carried out by sine sweeping test. Finally, theμ-synthesis controller is designed. The simulation and experimental results indicate that the designedμ-synthesis controller, which shows great robustness to modal perturbation, can effectively suppress the resonance vibration of flexible rotor and achieve supercritical operation.

18 December 2018 in Journal of Low Frequency Noise, Vibration and Active Control
Verified
Journal Article
Open access
SRShaolin Ran
Shaolin Ran
YHYefa Hu
Yefa Hu
Huachun WuHuachun Wu
Huachun Wu
XCXin Cheng
Xin Cheng
In modern industries, high-speed motors and generators have received great attention, and they are widely used in micro turbine, centrifugal compressor, blower, etc. However, the resonance vibration of flexible rotor will become a challenging issue when the rotor has to operate above the first bending critical speed. In this paper, a phase compensation method is proposed to improve the damping level of the flexible rotor around the first bending critical speed. The dynamic characteristics of the flexible rotor are analyzed, and the modal frequency is obtained. The rotor finite element model is verified by the modal test. Based on Proportion-Integration-Differentiation (PID) controller, the phase of the control system is shaped with different general filters to improve the damping level of the flexible rotor around the first bending critical speed. The simulation and experimental results indicate that the first bending mode damping of rotor is obviously enhanced by phase compensation. The phase compensation method can effectively suppress the resonance vibration of the rotor and make the rotor smoothly pass the first bending critical speed, achieving supercritical operation.