25 October 2001 in Journal of Geophysical Research
The Mars Orbiter Laser Altimeter (MOLA), an instrument on the Mars Global Surveyor spacecraft, has measured the topography, surface roughness, and 1.064‐μm reflectivity of Mars and the heights of volatile and dust clouds. This paper discusses the function of the MOLA instrument and the acquisition, processing, and correction of observations to produce global data sets. The altimeter measurements have been converted to both gridded and spherical harmonic models for the topography and shape of Mars that have vertical and radial accuracies of ∼1 m with respect to the planet's center of mass. The current global topographic grid has a resolution of 1/64° in latitude × 1/32° in longitude (1×2 km2at the equator). Reconstruction of the locations of incident laser pulses on the Martian surface appears to be at the 100‐m spatial accuracy level and results in 2 orders of magnitude improvement in the global geodetic grid of Mars. Global maps of optical pulse width indicative of 100‐m‐scale surface roughness and 1.064‐μm reflectivity with an accuracy of 5% have also been obtained.
18 September 2010 in Geophysical Research Letters
As of June 19, 2010, the Lunar Orbiter Laser Altimeter, an instrument on the Lunar Reconnaissance Orbiter, has collected over 2.0 × 109 measurements of elevation that collectively represent the highest resolution global model of lunar topography yet produced. These altimetric observations have been used to improve the lunar geodetic grid to ∼10 m radial and ∼100 m spatial accuracy with respect to the Moon's center of mass. LOLA has also provided the highest resolution global maps yet produced of slopes, roughness and the 1064‐nm reflectance of the lunar surface. Regional topography of the lunar polar regions allows precise characterization of present and past illumination conditions. LOLA's initial global data sets as well as the first high‐resolution digital elevation models (DEMs) of polar topography are described herein.
1 November 2017 in Journal of Geophysical Research: Planets
We used infrared data from the Lunar Reconnaissance Orbiter (LRO) Diviner Lunar Radiometer Experiment to globally map thermophysical properties of the Moon's regolith fines layer. Thermal conductivity varies from 7.4 × 10−4 W m−1 K−1 at the surface to 3.4 × 10−3 W m−1 K−1 at depths of ~1 m, given density values of 1,100 kg m−3 at the surface to 1,800 kg m−3 at 1 m depth. On average, the scale height of these profiles is ~7 cm, corresponding to a thermal inertia of 55 ± 2 J m−2 K−1 s−1/2 at 273 K, relevant to the diurnally active near‐surface layer, ~4–7 cm. The temperature dependence of thermal conductivity and heat capacity leads to an ~2 times diurnal variation in thermal inertia at the equator. On global scales, the regolith fines are remarkably uniform, implying rapid homogenization by impact gardening of this layer on timescales <1 Gyr. Regional‐ and local‐scale variations show prominent impact features 100 J m−2 K−1 s−1/2) in the interiors and ejecta of Copernican‐aged impact craters and lower thermal inertia (< 50 J m−2 K−1 s−1/2) within the lunar cold spots identified by Bandfield et al. (2014). Observed trends in ejecta thermal inertia provide a potential tool for age dating craters of previously unknown age, complementary to the approach suggested by Ghent et al. (2014). Several anomalous regions are identified in the global 128 pixels per degree maps presented here, including a high‐thermal inertia deposit near the antipode of Tycho crater.