14 June 2018 in Physical Review Letters
A series of cryogenic, layered deuterium-tritium (DT) implosions have produced, for the first time, fusion energy output twice the peak kinetic energy of the imploding shell. These experiments at the National Ignition Facility utilized high density carbon ablators with a three-shock laser pulse (1.5 MJ in 7.5 ns) to irradiate low gas-filled ( of helium) bare depleted uranium hohlraums, resulting in a peak hohlraum radiative temperature . The imploding shell, composed of the nonablated high density carbon and the DT cryogenic layer, is, thus, driven to velocity on the order of resulting in a peak kinetic energy of , which once stagnated produced a total DT neutron yield of (shot N170827) corresponding to an output fusion energy of 54 kJ. Time dependent low mode asymmetries that limited further progress of implosions have now been controlled, leading to an increased compression of the hot spot. It resulted in hot spot areal density () and stagnation pressure () never before achieved in a laboratory experiment.
1 April 2012 in Physics of Plasmas
Capsule implosions on the National Ignition Facility (NIF) [Lindl et al., Phys. Plasmas 11, 339 (2004)] are underway with the goal of compressing deuterium-tritium (DT) fuel to a sufficiently high areal density (ρR) to sustain a self-propagating burn wave required for fusion power gain greater than unity. These implosions are driven with a carefully tailored sequence of four shock waves that must be timed to very high precision in order to keep the DT fuel on a low adiabat. Initial experiments to measure the strength and relative timing of these shocks have been conducted on NIF in a specially designed surrogate target platform known as the keyhole target. This target geometry and the associated diagnostics are described in detail. The initial data are presented and compared with numerical simulations. As the primary goal of these experiments is to assess and minimize the adiabat in related DT implosions, a methodology is described for quantifying the adiabat from the shock velocity measurements. Results are contrasted between early experiments that exhibited very poor shock timing and subsequent experiments where a modified target geometry demonstrated significant improvement.
28 April 2017 in Physics of Plasmas
We report on the most recent and successful effort at controlling the trajectory and symmetry of a high density carbon implosion at the National Ignition Facility. We use a low gasfill (0.3 mg/cc He) bare depleted uranium hohlraum with around 1 MJ of laser energy to drive a 3-shock-ignition relevant implosion. We assess drive performance and we demonstrate symmetry control at convergence 1, 3–5, 12, and 27 to better than ±5 μm using a succession of experimental platforms. The symmetry control was maintained at a peak fuel velocity of 380 km/s. Overall, implosion symmetry measurements are consistent with the pole-equator symmetry of the X-ray drive on the capsule being better than 5% in the foot of the drive (when shocks are launched) and better than 1% during peak drive (main acceleration phase). This level of residual asymmetry should have little impact on implosion performance.
25 February 2011 in Physical Review Letters
We demonstrate the hohlraum radiation temperature and symmetry required for ignition-scale inertial confinement fusion capsule implosions. Cryogenic gas-filled hohlraums with 2.2 mm-diameter capsules are heated with unprecedented laser energies of 1.2 MJ delivered by 192 ultraviolet laser beams on the National Ignition Facility. Laser backscatter measurements show that these hohlraums absorb 87% to 91% of the incident laser power resulting in peak radiation temperatures of and a symmetric implosion to a diameter hot core.
24 May 2012 in Physical Review Letters
Ignition implosions on the National Ignition Facility [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)] are underway with the goal of compressing deuterium-tritium fuel to a sufficiently high areal density () to sustain a self-propagating burn wave required for fusion power gain greater than unity. These implosions are driven with a very carefully tailored sequence of four shock waves that must be timed to very high precision to keep the fuel entropy and adiabat low and high. The first series of precision tuning experiments on the National Ignition Facility, which use optical diagnostics to directly measure the strength and timing of all four shocks inside a hohlraum-driven, cryogenic liquid-deuterium-filled capsule interior have now been performed. The results of these experiments are presented demonstrating a significant decrease in adiabat over previously untuned implosions. The impact of the improved shock timing is confirmed in related deuterium-tritium layered capsule implosions, which show the highest fuel compression () measured to date, exceeding the previous record [V. Goncharov et al., Phys. Rev. Lett. 104, 165001 (2010)] by more than a factor of 3. The experiments also clearly reveal an issue with the 4th shock velocity, which is observed to be 20% slower than predictions from numerical simulation.
21 November 2018 in Plasma Physics and Controlled Fusion
Producing a burning plasma in the laboratory has been a long-standing milestone for the plasma physics community. A burning plasma is a state where alpha particle deposition from deuterium–tritium (DT) fusion reactions is the leading source of energy input to the DT plasma. Achieving these high thermonuclear yields in an inertial confinement fusion (ICF) implosion requires an efficient transfer of energy from the driving source, e.g., lasers, to the DT fuel. In indirect-drive ICF, the fuel is loaded into a spherical capsule which is placed at the center of a cylindrical radiation enclosure, the hohlraum. Lasers enter through each end of the hohlraum, depositing their energy in the walls where it is converted to x-rays that drive the capsule implosion. Maintaining a spherically symmetric, stable, and efficient drive is a critical challenge and focus of ICF research effort. Our program at the National Ignition Facility has steadily resolved challenges that began with controlling ablative Rayleigh–Taylor instability in implosions, followed by improving hohlraum-capsule x-ray coupling using low gas-fill hohlraums, improving control of time-dependent implosion symmetry, and reducing target engineering feature-generated perturbations. As a result of this program of work, our team is now poised to enter the burning plasma regime.