In this work, high frequency and low power ultrasound without external heating source and mechanical stirring in biodiesel production were studied. Transesterification of soybean oil with methanol and catalyzed by KOH was investigated using ultrasound equipment and ultrasonic transducer. The effect of ultrasonic output power (3 W-9 W), ultrasonic frequency (1 MHz and 3 MHz), and alcohol to oil molar ratio (6:1 and 8:1) have been investigated. The increase in ultrasonic power provided higher conversion rates. In addition, higher conversion rates were obtained by increasing the ultrasonic frequency from 1 MHz to 3 MHz (48.7% to 79.5%) for the same reaction time. Results also indicate that the speed of sound can be used to evaluate the produced biodiesel qualitatively. Further, the ultrasound system presented electric consumption (46.2W∙h) four times lower than achieved using the conventional method (211.7W∙h and 212.3W∙h). Thus, biodiesel production using low power ultrasound in the MHz frequency range is a promising technology that could contribute to biodiesel production processes.
This work aims at investigating seven morphological parameters in distinguishing malignant and benign breast tumors on ultrasound images. Linear discriminant analysis was applied to sets of up to five parameters and then the performances were assessed using the area Az (+/- standard error) under the ROC curve, accuracy (Ac), sensitivity (Se), specificity (Sp), positive predictive value and negative predictive value. The most relevant individual parameters were the normalized residual value (nrv) and overlap ratio (RS), both calculated from the convex polygon technique, and the circularity (C). When nrv and C were taken together with roughness (R), calculated from normalized radial length (NRL), a performance slightly over 83% in distinguishing malignant and benign breast tumors was achieved.