29 September 2014 in Advanced Functional Materials
25 October 2019 in Advanced Intelligent Systems
Bioinspired soft robotics have unique advantages in superior adaptability and complex motions for field exploration and interaction with humans. The mobility and output force, however, are still the critical challenges for many promising applications. It is attractive to develop “untethered” robotics to improve the mobility by getting rid of the external electrical or pneumatic tethers while achieving massive output stroke and force. Inspired by the creatures' movements induced by the multiplication of cells and asymmetric volume changes of the tissue, an untethered soft actuator composed of self‐contained liquids and super‐elastic chambers is proposed, and by remote stimuli (e.g., near‐infrared light), the capsuled liquids transit from liquid to vapor, giving rise to volume change in the corresponding chambers. Programmable motions, i.e., photophobia of artificial sunflower, can be realized, indicating a massive and linear driving stroke (up to 160% in elongation, 0.5 mm °C−1) and output force (14.5 N with 6 g self‐weight, 0.33 N °C−1). The untethered soft actuator suggests a feasible approach to develop smart, soft, and autonomous robotics and holds promise in fields ranging from surgery to rehabilitation and rescue.
29 October 2015 in Advanced Functional Materials
6 June 2016 in Scientific Reports
Photomechanical nanocomposites embedded with light-absorbing nanoparticles show promising applications in photoresponsive actuations. Near infrared (nIR)-responsive nanocomposites based photomechanical soft actuators can offer lightweight functional and underexploited entry into soft robotics, active optics, drug delivery,etc. A novel graphene-based photomechanical soft actuators, constituted by Polydimethylsiloxane (PDMS)/graphene-nanoplatelets (GNPs) layer (PDMS/GNPs) and pristine PDMS layer, have been constructed. Due to the mismatch of coefficient of thermal expansion of two layers induced by dispersion of GNPs, controllable and reversible bendings response to nIR light irradiation are observed. Interestingly, two different bending behaviors are observed when the nIR light comes from different sides,i.e., a gradual single-step photomechanical bending towards PDMS/GNPs layer when irradiation from PDMS side, while a dual-step bending (finally bending to the PDMS/GNPs side but with an strong and fast backlash at the time of light is on/off) when irradiation from PDMS/GNPs side. The two distinctive photomechanical bending behaviors are investigated in terms of heat transfer and thermal expansion, which reveals that the distinctive bending behaviors can be attributed to the differences in temperature gradients along the thickness when irradiation from different sides. In addition, the versatile photomechanical bending properties will provide alternative way for drug-delivery, soft robotics and microswitches,etc.
11 March 2016 in Nanoscale
In recent years, energy harvesting technologies, which can scavenge many kinds of energies from our living environment to power micro/nanodevices, have attracted increasing attention. However, remote energy transmission, flexibility and electric waveform controllability remain the key challenges for wireless power supply by an energy harvester. In this paper, we design a new infrared-driven non-contact pyroelectric generator for harvesting heat energy, which avoids direct contact between the pyroelectric generator and heat source and realizes remote energy transfer exploiting the photothermal and penetrability of infrared light. The output voltage (under the input impedance of 100 MOhm) and short-circuit current of the pyroelectric generator consisting of a CNT/PVDF/CNT layer (20 mm × 5 mm × 100 μm) can be as large as 1.2 V and 9 nA, respectively, under a 1.45 W cm−2 near-infrared laser (808 nm). We also demonstrate the means by which the pyroelectric generator can modulate square waveforms with controllable periods through irradiation frequency, which is essential for signal sources and medical stimulators. The overshoot of square waveforms are in a range of 9.0%–13.1% with a rise time of 120 ms. The prepared pyroelectric generator can light a liquid crystal display (LCD) in a vacuum chamber from outside. This work paves the way for non-contact energy harvesting for some particular occasions where near-field energy control is not available.
1 March 2016 in Sensors and Actuators A: Physical