1 January 2020 in Journal of Controlled Release
30 November 2015 in Proceedings of the National Academy of Sciences
In this study, we present a method for assembling biofunctionalized paper into a multiform structured scaffold system for reliable tissue regeneration using an origami-based approach. The surface of a paper was conformally modified with a poly(styrene-co-maleic anhydride) layer via initiated chemical vapor deposition followed by the immobilization of poly-l-lysine (PLL) and deposition of Ca2+. This procedure ensures the formation of alginate hydrogel on the paper due to Ca2+ diffusion. Furthermore, strong adhesion of the alginate hydrogel on the paper onto the paper substrate was achieved due to an electrostatic interaction between the alginate and PLL. The developed scaffold system was versatile and allowed area-selective cell seeding. Also, the hydrogel-laden paper could be folded freely into 3D tissue-like structures using a simple origami-based method. The cylindrically constructed paper scaffold system with chondrocytes was applied into a three-ring defect trachea in rabbits. The transplanted engineered tissues replaced the native trachea without stenosis after 4 wks. As for the custom-built scaffold system, the hydrogel-laden paper system will provide a robust and facile method for the formation of tissues mimicking native tissue constructs. Significance This work describes an intriguing strategy for the formation of hydrogel-laden multiform structures utilizing paper sheets and suggests a route for trachea tissue engineering. It combines concepts extracted from paper origami, functional thin polymer coating, and thin hydrogel layering on top of the paper scaffolds. A computer-aided design-based lock-and-key arrangement was used for folding the sheets into multiform structures with spatial arrangements. With encapsulating cells in hydrogel-laden paper, the scaffold system was able to deliver biological cues in vivo. In this work, we have successfully applied an origami-based tissue engineering approach to the trachea regeneration model.
9 March 2020 in Scientific Reports
For successful tracheal reconstruction, tissue-engineered artificial trachea should meet several requirements, such as biocompatible constructs comparable to natural trachea, coverage with ciliated respiratory mucosa, and adequate cartilage remodeling to support a cylindrical structure. Here, we designed an artificial trachea with mechanical properties similar to the native trachea that can enhance the regeneration of tracheal mucosa and cartilage through the optimal combination of a two-layered tubular scaffold and human induced pluripotent stem cell (iPSC)-derived cells. The framework of the artificial trachea was fabricated with electrospun polycaprolactone (PCL) nanofibers (inner) and 3D-printed PCL microfibers (outer). Also, human bronchial epithelial cells (hBECs), iPSC-derived mesenchymal stem cells (iPSC-MSCs), and iPSC-derived chondrocytes (iPSC-Chds) were used to maximize the regeneration of tracheal mucosa and cartilagein vivo. After 2 days of cultivation using a bioreactor system, tissue-engineered artificial tracheas were transplanted into a segmental trachea defect (1.5-cm length) rabbit model. Endoscopy did not reveal granulation ingrowth into tracheal lumen. Alcian blue staining clearly showed the formation of ciliated columnar epithelium in iPSC-MSC groups. In addition, micro-CT analysis showed that iPSC-Chd groups were effective in forming neocartilage at defect sites. Therefore, this study describes a promising approach for long-term functional reconstruction of a segmental tracheal defect.
1 September 2019 in Acta Biomaterialia
1 January 2017 in Otology & Neurotology
Objectives: The aim of this study was to quantitatively measure the tightness of the goggle strap during the video head impulse test (vHIT) and to identify slippage-induced artifacts according to tightness. We aimed to elucidate the mechanism of faulty gain caused by goggle slippage and explain the typical artifacts associated with it. Subjects and Methods: An endotracheal tube cuff manometer was coupled to the EyeSeeCam vHIT system (Interacoustics, Assens, Denmark) to monitor strap tightness. The instantaneous gain (40, 60, and 80 ms) and regression gain were compared in eight healthy subjects under the following strap tightness conditions: loose (25 cm H2O), tight (35 cm H2O), and very tight (45 cm H2O). To elucidate the mechanism of faulty gain caused by goggle slippage, a fake fixed pupil with a vestibule ocular reflex (VOR) gain of 0 was attached to the subject's eyelid. The faulty gain recording pattern was analyzed as the tightness of the strap was decreased. Results: The most common slippage-induced artifacts were: 1) initial backward eye movement toward the head movement, 2) acceleration bumps, 3) high gain, and 4) deceleration bumps. At 40 ms, the gain was significantly lower in the 25 cm H2O condition (0.68 ± 0.32 cm H2O) compared with the 45 cm H2O condition (0.90 ± 0.26 cm H2O). At 80 ms, the gain was higher for the 25 cm H2O condition (1.24 ± 0.27 cm H2O) compared with the 45 cm H2O condition (1.16 ± 0.30 cm H2O). These findings were progressively more obvious as the tightness of the strap decreased in a dose-dependent manner. When the fake pupil was recorded, initial backward eye movement toward the head movement (negative VOR gain) and eye tracing mimicking a small VOR (positive VOR gain) were recorded, despite the fake pupil having absolutely no movement. These artifact recordings are presumed to be related to the faulty low (40 ms) and high (80 ms) gain calculation. Conclusions: Slippage-induced artifacts are presumed to be because of the slingshot-like movement of the goggles during head movement in three different phases (lagging, overshooting, and bouncing of the goggles). Monitoring the pressure of the strap tightness may be a solution for minimizing this slippage. A strap tightness of at least 45 cm H2O is required for reliable vHIT recording and gain calculations.