Blake P. Tullis

Blake P. Tullis

Auto-generated profile, based on publicly available information

Blake P. Tullis

Professor, Utah Water Research Laboratory, Dept. Civil and Environmental Engineering, Utah State Univ., 8200 Old Main Hill, Logan, UT 84322-8200. ORCID:

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2013 in Journal of Irrigation and Drainage Engineering
Verified
Journal Article
Closed access
Brian CrookstonBrian Crookston
Brian Crookston
BTB. P. Tullis
B. P. Tullis
A method is presented for the hydraulic design and analysis of labyrinth weirs based upon the experimental results of physical modeling. Discharge coefficient data for labyrinth weirs with quarter-round and half-round crest shapes are presented for sidewall angles ranging from 6 to 35°. Cycle efficiency is also introduced as a design aid, which compares the hydraulic performance of different cycle geometries. Geometric parameters that affect flow performance are discussed. The predictive accuracy of the design method is evaluated through comparisons to previously published labyrinth weir head-discharge data. The companion paper examines nappe behaviors that affect flow performance and presents hydraulic design considerations specific to nappe characteristics.

1 March 2013 in Journal of Irrigation and Drainage Engineering
Verified
Journal Article
Closed access
RAR. M. Anderson
R. M. Anderson
BTB. P. Tullis
B. P. Tullis
A piano key (PK) weir is a type of nonlinear (labyrinth-type) control structure with a relatively small spillway footprint. No standard PK weir design procedure is available, and the amount of published information on PK weirs is limited. PK weirs have a large number of geometric parameters that can affect head-discharge performance. A PK weir geometric design has, however, been recommended in the literature, along with a head-discharge relationship specific to that PK weir geometry. To develop a better understanding of the effects of PK weir geometry on discharge efficiency, nine laboratory-scale four-cycle PK weir configurations were tested (including the recommended design). The effects of the following PK weir geometry or modifications on weir performance were partially isolated: varying the inlet-to-outlet key ratio, raising the crest via a parapet wall, rounding the upstream apex walls, and varying the crest type. The appropriateness of the recommended head-discharge equation specific to the...

18 August 2016 in Journal of Hydraulic Research
Verified
Journal Article
Closed access
SESebastien Erpicum
Sebastien Erpicum
BTBlake P. Tullis
Blake P. Tullis
MLMaurine Lodomez
Maurine Lodomez
PAPierre Archambeau
Pierre Archambeau
BDBenjamin Dewals
Benjamin Dewals
MPMichel Pirotton
Michel Pirotton
With inertia and gravity representing the dominant forces for most open channel flow applications (e.g. weir flow), Froude similitude is commonly used for scaling hydraulic performance data from the model to prototype structures. With weir flow, as the upstream head decreases, however, the relevance of surface tension and viscosity forces can increase to the point when the model and prototype similitude is not fully achieved through Froude scaling. Such discrepancies are referred as size-scale effects, and among other things, can result in variations in the head–discharge relationship, nappe trajectory, and air entrainment. Published criteria for avoiding significant size-scale effects for free flow over linear weirs have suggested that minimal heads of ∼0.02 to 0.07 m be respected, independently of the model size. In this study, the size-scale effect, minimum upstream head, and Weber number limits are investigated for four piano key weirs with geometric model scales of 1:1, 1:7, 1:15, and 1:25.

1 April 2012 in Journal of Hydraulic Engineering
Verified
Journal Article
Closed access
RAR. M. Anderson
R. M. Anderson
BTB. P. Tullis
B. P. Tullis
The piano key or PK weir represents a relatively new hydraulic structure in both research and practice. There is currently a limited understanding regarding the influence of the large number of PK weir geometric parameters on hydraulic performance. A specific PK weir design configuration, suggested to be highly efficient, has been presented in the literature. By using laboratory-scale physical models, the hydraulic efficiency of the recommended PK weir design was compared with that of a geometrically comparable rectangular labyrinth weir, with and without sloping floors (consistent with the PK weir geometry) installed in the inlet and outlet keys or cycles. In general, the test data showed that the PK weir was more efficient than the geometrically comparable rectangular labyrinth weir, a fact likely attributable to a reduction in entrance losses associated with the PK weir inlet key geometry.

1 May 2013 in Journal of Irrigation and Drainage Engineering
Verified
Journal Article
Closed access
Brian CrookstonBrian Crookston
Brian Crookston
BTB. P. Tullis
B. P. Tullis
Nappe behavior should be considered in the design of labyrinth weirs to ensure hydraulic optimization and to account for potential vibrations, pressure fluctuations, noise, and flow surging. Information regarding nappe aeration conditions (clinging, aerated, partially aerated, and drowned), nappe instability, and nappe vibrations for trapezoidal labyrinth weirs on a horizontal apron with quarter- and half-round crests (6°≤ sidewall angle ≤35°) is presented. Corresponding headwater ratio ranges and hydraulic behaviors associated with nappe aeration conditions are documented and discussed to aid in labyrinth weirs design, including design options directly related to nappe behavior (e.g., crest shape, crest roughness, vents, nappe breakers, notches, and staged cycles). The effects of artificial nappe aeration (a vented nappe) on nappe behavior and discharge capacity are also discussed, including recommended placements of nappe breakers.

1 August 2012 in Journal of Irrigation and Drainage Engineering
Verified
Journal Article
Closed access
Brian CrookstonBrian Crookston
Brian Crookston
BTB. P. Tullis
B. P. Tullis
The interaction of nappes from adjacent weir walls near an upstream apex can cause local submergence, which reduces labyrinth weir discharge efficiency. Local submergence effects can cause the head-discharge relationships for labyrinth weirs of equivalent lengths but different cycle numbers to differ. Empirical labyrinth weir discharge coefficients implicitly account for apex effects and local submergence; however, the uncertainty associated with applying hydraulic design data developed from specific weir geometries to comparable but different labyrinth weir geometries is not well understood. This study investigates the concept of labyrinth weir nappe interference and identifies labyrinth weir flow characteristics that decrease discharge efficiency, including local submergence. Parametric methods for quantifying nappe interference region size as a function of weir geometry (e.g., sidewall angle and crest shape) and flow conditions (e.g., headwater and nappe aeration) are presented. A comparison be...