25 June 2015 in Optics Letters
We report on the use of a thulium-fiber-pumped holmium-based emitter in a coherent differential absorption lidar (CDIAL) experiment for high time and space resolution of absorption field in the atmosphere. The 2-μm high-power dual-wavelength single-mode -switched Ho:YLF oscillator delivers 10-mJ pulses with a duration of 40 ns at 2 kHz. Both short pulse duration and high repetition rate were chosen to increase the DIAL precision and time and space resolution in coherent detection. The CDIAL provides 150-m range and 15-min time-resolved absorption coefficient with a calculated instrumental error of 0.5% at 500 m and less than 2% at 1 km. Dry-air mixing ratio estimates from the DIAL system are compared with simultaneous in situ gas analyzer measurements during a 20-h-long experiment.
11 December 2018 in Applied Optics
In the framework of space-borne lidar development, the transmitter is a critical unit. We report on the development and the assessment of performances of a 2-μm single-frequency thulium fiber laser pumped -switched Ho:YLF laser. To fulfill the requirements of space-based operation, a master oscillator power amplifier architecture has been chosen, and the oscillator works in double-pulse operation. The transmitter can generate a single-mode dual wavelength emission “ON” and “OFF” around the R30e line of the band of . It delivers a pair of OFF-ON pulses with 12 mJ and 42 mJ energy, respectively, at a pulse repetition frequency of 303.5 Hz. The pulse energy and central frequency stabilities are especially documented as well as pulse duration, polarization, overall efficiency, beam quality, pointing stability, and spectral purity. The possible limitations by light-induced damage or radiation-induced attenuation on the laser performances are also evaluated.
18 January 2025 in Journal of the European Meteorological Society
24 October 2018 in Atmospheric Measurement Techniques
The CNES (French Space Agency) and DLR (German Space Agency) project MERLIN is a future integrated path differential absorption (IPDA) lidar satellite mission that aims at measuring methane dry-air mixing ratio columns (XCH4) in order to improve surface flux estimates of this key greenhouse gas. To reach a 1 % relative random error on XCH4 measurements, MERLIN signal processing performs an averaging of data over 50 km along the satellite trajectory. This article discusses how to process this horizontal averaging in order to avoid the bias caused by the non-linearity of the measurement equation and measurements affected by random noise and horizontal geophysical variability. Three averaging schemes are presented: averaging of columns of XCH4, averaging of columns of differential absorption optical depth (DAOD) and averaging of signals. The three schemes are affected both by statistical and geophysical biases that are discussed and compared, and correction algorithms are developed for the three schemes. These algorithms are tested and their biases are compared on modelled scenes from real satellite data. To achieve the accuracy requirements that are limited to 0.2 % relative systematic error (for a reference value of 1780 ppb), we recommend performing the averaging of signals corrected from the statistical bias due to the measurement noise and from the geophysical bias mainly due to variations of methane optical depth and surface reflectivity along the averaging track. The proposed method is compliant with the mission relative systematic error requirements dedicated to averaging algorithms of 0.06 % (±1 ppb for XCH4=1780ppb) for all tested scenes and all tested ground reflectivity values.
5 July 2011 in Quarterly Journal of the Royal Meteorological Society
Generation of internal gravity waves in the boundary layer is investigated from observations. Simultaneous measurements from a 2 µm Doppler lidar and a 0.5 µm backscatter lidar are combined to analyse the occurrence, or not, of internal gravity waves in the residual layer during the morning transition on two days, 10 and 14 June 2005. Three cases are studied for illustrating three different flow configurations in the residual layer: no wave, evanescent wave and propagating wave. Comparison of the three cases suggests two necessary conditions for the generation of gravity waves: a stably stratified residual layer and a convective boundary layer with mechanical forcing frequencies less than the Brunt–Vaïsala frequency. The horizontal wind shear probably plays a role in the dynamics of the waves, but, in the cases analysed, it is not sufficient alone to generate the observed waves through the obstacle effect. In the case of wave propagation, the waves tilt upstream and against the wind shear, with a typical horizontal wavelength and a line phase direction with respect to the vertical of 2.4 km and 32°, respectively. Unexpectedly, we found that measurements of the wave‐associated vertical velocity and the displacement of tracers (0.5 µm depolarization ratio or 2 µm backcatter, both indicative of relative humidity fluctuations) are in phase. Possible explanations include: (i) aerosol particles are not passive with respect to temperature or water vapour fluctuations; or (ii) a nonlinear wave‐turbulence interaction is at work and needs further investigation. Copyright © 2011 Royal Meteorological Society