1 December 2019 in Sensors and Actuators B: Chemical
1 November 2021 in Analytica Chimica Acta
13 October 2023 in Food Chemistry
1 August 2021 in Analytica Chimica Acta
1 March 2019 in Russian Journal of Electrochemistry
Fast-scan anodic stripping voltammetry (FSASV) was applied to sensitively detect Pb2+on a mercury film electrode (MFE). The method was involved with a controlled preconcentration by accumulation of...
30 November 2014 in Journal of Electrical and Computer Engineering
With the scaling of technology process, leakage power becomes an increasing portion of total power. Power gating technology is an effective method to suppress the leakage power in VLSI design. When the power gating technique is applied in sequential circuits, such as flip-flops and latches, the data retention is necessary to store the circuit states. A low leakage autonomous data retention flip-flop (ADR-FF) is proposed in this paper. Two high-transistors are utilized to reduce the leakage power consumption in the sleep mode. The data retention cell is composed of a pair of always powered cross-coupled inverters in the slave latch. No extra control signals and complex operations are needed for controlling the data retention and restoration. The data retention flip-flops are simulated with NCSU 45 nm technology. The postlayout simulation results show that the leakage power of the ADR-FF reduces 51.39% compared with the Mutoh-FF. The active power of the ADR-FF is almost equal to other data retention flip-flops. The average state mode transition time of ADR-FF decreases 55.98%, 51.35%, and 21.07% as compared with Mutoh-FF, Balloon-FF, and Memory-TG-FF, respectively. Furthermore, the area overhead of ADR-FF is smaller than other data retention flip-flops.