1 July 2014 in Journal of Friction and Wear
The effect of conditions of crystallization in the course of the production of a bearing lining on the structure and wear of the B83 babbit has been studied. It is shown that the pressing of the melt being crystallized makes it possible to form a homogeneous structure with fine crystals of the cubic SnSb phase. The babbit produced by liquid forging has the highest wear resistance.
1 June 2003 in Journal of Materials Engineering and Performance
1 January 2017 in Journal of Friction and Wear
The microstructure of β-phase of Sn11Sb5.5Cu Babbitt produced by casting and liquid forging has been analyzed by optical and scanning electron microscopy using EBSD analysis. It has been established that a significant decrease in the wear rate of Babbitt produced by liquid forging is caused by generation of fine grain structure in the particles of the β phase.
1 January 2015 in Inorganic Materials: Applied Research
The modes of radial-shear rolling (RSR) of hot-pressed rods of aluminum alloy D16 providing for production of high-quality long-length semifinished items are experimentally studied. Investigations of
11 March 2009 in Physics of the Solid State
The temperature dependence of the thermal expansion of cobalt in various structural states was studied. It is shown that, in the temperature range wherein a coarse-grained sample elongates in a jumpwise manner, a sample with a nanocrystalline structure does not demonstrate such a behavior. The linear thermal expansion of the nanocrystalline sample over the entire temperature range of heating is explained by the fact that the hcp-fcc phase transformation does not occur in the nanocrystalline cobalt. The phase transformation occurs only after annealing of the nanocrystalline sample at 923 K for 30 min when the crystallites grow to a certain size. It is shown that the nanostructural state of cobalt is stable up to 793 K.
1 May 2005 in Journal of Materials Engineering and Performance