14 September 2017 in Measurement Science and Technology
Registration of multiple sensors is a basic step in multi-sensor dimensional or coordinate measuring systems before any measurement. In most cases, a common standard is used to be measured by all sensors, and this may work well for general registration of multiple homogeneous sensors. However, when inhomogeneous sensors detect a common standard, it is usually very difficult to obtain the same information, because of the different working principles of the sensors. In this paper, a new method called multiple steps registration is proposed to register two sensors: a video camera sensor (VCS) and a tactile probe sensor (TPS). In this method, the two sensors measure two separated standards: a chrome circle on a reticle and a reference sphere with a constant distance between them, fixed on a steel plate. The VCS captures only the circle and the TPS touches only the sphere. Both simulations and real experiments demonstrate that the proposed method is robust and accurate in the registration of multiple inhomogeneous sensors in a dimensional measurement system.
6 April 2020 in IEEE Access
A novel system and its corresponding method for the measurement and the exact reconstruction of a pair of parallel profiles are designed. There are six sensors installed on the measuring device and they are divided into two groups with different sensor spacings. The exact reconstruction can be realized under the condition of a high lateral resolution, as the straightness error, the yaw error, the zeroadjustment error, and the data processing error can be all eliminated through two scannings and certain data processing method. The measurement error of the displacement sensors can also be suppressed. The new method has the following advantages: (i) the realization of the exact reconstruction, (ii) a high lateral resolution of the reconstruction result which is independent of the sensor spacings, (iii) the skip of the zero calibration before the measurement process, and (iv) the suppression of the sensor random error. These advantages are demonstrated by the theoretical analyses and the simulations. Experiments are also conducted to prove some of these characteristics.