19 June 2014 in Scientific Reports
Interest in additive manufacturing (AM) has dramatically expanded in the last several years, owing to the paradigm shift that the process provides over conventional manufacturing. Although the vast majority of recent work in AM has focused on three-dimensional printing in polymers, AM techniques for fabricating metal alloys have been available for more than a decade. Here, laser deposition (LD) is used to fabricate multifunctional metal alloys that have a strategically graded composition to alter their mechanical and physical properties. Using the technique in combination with rotational deposition enables fabrication of compositional gradients radially from the center of a sample. A roadmap for developing gradient alloys is presented that uses multi-component phase diagrams as maps for composition selection so as to avoid unwanted phases. Practical applications for the new technology are demonstrated in low-coefficient of thermal expansion radially graded metal inserts for carbon-fiber spacecraft panels.
28 August 2014 in Journal of Materials Research
10 September 2010 in Science
Bulk metallic glasses (BMGs) are being studied extensively as potential structural materials as they have a unique array of mechanical properties compared to traditional crystalline metals (1–4). Their amorphous microstructure and variable composition give BMGs ultrahigh-yield strengths, large elastic strain limits, high hardness, corrosion resistance, and the ability to be processed like a plastic. So far, however, BMGs have not found many structural applications because of their catastrophic failure under tension (tensile loading) and their typically low fracture toughness (resistance to cracking), both resulting from the same amorphous microstructure that differentiates them from crystalline metals. This shortcoming has been addressed in recent years with the development of BMG matrix composites (BMGMCs)—two-phase alloys consisting of soft, crystalline dendrites grown in situ in a glass-forming matrix (5–9). When designed and processed properly, BMGMCs retain the positive structural features exhibited by monolithic (single-phase) BMGs, but can also exhibit enhanced tensile ductility, fracture toughness, and fatigue endurance, which makes them desirable as engineering materials (5, 10, 11).
24 November 2016 in Scientific Reports
The use of bulk metallic glasses (BMGs) as the flexspline in strain wave gears (SWGs), also known as harmonic drives, is presented. SWGs are unique, ultra-precision gearboxes that function through the elastic flexing of a thin-walled cup, called a flexspline. The current research demonstrates that BMGs can be cast at extremely low cost relative to machining and can be implemented into SWGs as an alternative to steel. This approach may significantly reduce the cost of SWGs, enabling lower-cost robotics. The attractive properties of BMGs, such as hardness, elastic limit and yield strength, may also be suitable for extreme environment applications in spacecraft.
4 October 2016 in Advanced Engineering Materials
11 December 2012 in Advanced Engineering Materials