10 October 2016 in Optics Letters
Highly efficient absorption of light at telecommunication wavelengths in monolayer graphene is numerically and theoretically investigated in a multi-layer photonic configuration, which consists of an ultrathin metal film coated on a dielectric Bragg mirror and a graphene sheet in a silica spacer. Our results show that the absolute absorption of light in the single-atomic-layer graphene can significantly reach 80% (34.8-fold enhancement compared to the intrinsic value of 2.3%), due to the strong field confinement of Tamm plasmon polaritons in the silica spacer. Moreover, we find that the absorption efficiency of graphene is critically dependent on the position of the graphene in the spacer. The operating wavelength is flexibly tunable by adjusting the incident angle of light and the thicknesses of metal and Bragg mirror layers. The meaningful improvement and tunability of graphene absorption may find favorable applications for the realization of high-performance graphene optoelectronic devices, such as detectors and modulators.
12 April 2017 in Photonics Research
We investigate the electrically controlled light propagation in the metal–dielectric–metal plasmonic waveguide with a sandwiched graphene monolayer. The theoretical and simulation results show that the propagation loss exhibits an obvious peak when the permittivity of graphene approaches an epsilon-near-zero point when adjusting the gate voltage on graphene. The analog of electromagnetically induced transparency (EIT) can be generated by introducing side-coupled stubs into the waveguide. Based on the EIT-like effect, the hybrid plasmonic waveguide with a length of only 1.5 μm can work as a modulator with an extinction ratio of , which is 2.3 times larger than the case without the stubs. The active modulation of surface plasmon polariton propagation can be further improved by tuning the carrier mobility of graphene. The graphene-supported plasmonic waveguide system could find applications for the nanoscale manipulation of light and chip-integrated modulation.
29 August 2017 in Optics Express
A novel multilayer photonic structure is proposed to achieve the strong enhancement of light absorption in monolayer molybdenum disulfide (MoS2). Both numerical and analytical results illustrate that the absolute absorption of light in this atomically thin layer can approach as high as 96% at the visible wavelengths due to the excitation of Tamm plasmon mode. It is also found that the operating wavelength and height of sharp absorption peak are particularly dependent on the layer thicknesses and period number of dielectric grating, MoS2 position in the spacer, and incident angle of light, which contribute to the tunability and selectivity of light-MoS2 interaction. These results would provide a new pathway for the improvement of MoS2 photoluminescence and photodetection.
27 February 2017 in Optics Express
The plasmonic responses in the spatially separated phosphorene (single-layer black phosphorus) pairs are investigated, mainly containing the field enhancement, light confinement, and optical force. It is found that the strong anisotropic dispersion of black phosphorus gives rise to the direction-dependent symmetric and anti-symmetric plasmonic modes. Our results demonstrate that the symmetrical modes possess stronger field enhancement, higher light confinement, and larger optical force than the anti-symmetric modes in the nanoscale structures. Especially, the light confinement ratio and optical force for the symmetric mode along the armchair direction of black phosphorus can reach as high as >90% and >3000 pN/mW, respectively. These results may open a new door for the light manipulation at nanoscale and the design of black phosphorus based photonic devices.
23 November 2020 in Light: Science & Applications
Magnetic resonances not only play crucial roles in artificial magnetic materials but also offer a promising way for light control and interaction with matter. Recently, magnetic resonance effects have attracted special attention in plasmonic systems for overcoming magnetic response saturation at high frequencies and realizing high-performance optical functionalities. As novel states of matter, topological insulators (TIs) present topologically protected conducting surfaces and insulating bulks in a broad optical range, providing new building blocks for plasmonics. However, until now, high-frequency (e.g. visible range) magnetic resonances and related applications have not been demonstrated in TI systems. Herein, we report for the first time, to our knowledge, a kind of visible range magnetic plasmon resonances (MPRs) in TI structures composed of nanofabricated Sb2Te3 nanogrooves. The experimental results show that the MPR response can be tailored by adjusting the nanogroove height, width, and pitch, which agrees well with the simulations and theoretical calculations. Moreover, we innovatively integrated monolayer MoS2 onto a TI nanostructure and observed strongly reinforced light–MoS2 interactions induced by a significant MPR-induced electric field enhancement, remarkable compared with TI-based electric plasmon resonances (EPRs). The MoS2 photoluminescence can be flexibly tuned by controlling the incident light polarization. These results enrich TI optical physics and applications in highly efficient optical functionalities as well as artificial magnetic materials at high frequencies.
24 January 2018 in Scientific Reports
The quality (Q) factor and tunability of electromagnetically induced transparency (EIT)-like effect in plasmonic systems are restrained by the intrinsic loss and weak adjustability of metals, limiting the performance of the devices including optical sensor and storage. Exploring new schemes to realize the high Q-factor and tunable EIT-like effect is particularly significant in plasmonic systems. Here, we present an ultrahigh Q-factor and flexibly tunable EIT-like response in a novel plasmonic system. The results illustrate that the induced transparency distinctly appears when surface plasmon polaritons excited on the metal satisfy the wavevector matching condition with the guided mode in the high-refractive index (HRI) layer. The Q factor of the EIT-like spectrum can exceed 2000, which is remarkable compared to that of other plasmonic systems such as plasmonic metamaterials and waveguides. The position and lineshape of EIT-like spectrum are strongly dependent on the geometrical parameters. An EIT pair is generated in the splitting absorption spectra, which can be easily controlled by adjusting the incident angle of light. Especially, we achieve the dynamical tunability of EIT-like spectrum by changing the Fermi level of graphene inserted in the system. Our results will open a new avenue toward the plasmonic sensing, spectral shaping and switching.