2 September 2019 in Advanced Materials Technologies
15 July 2020 in Advanced Electronic Materials
24 March 2020 in Journal of Materials Chemistry A
The flexible Co@NPCFs composites can provide rich active sites for electrocatalysis and are able to capture oxygen and desorb the OH− during the discharging and charging processes of ZABs.
23 May 2020 in Journal of Materials Chemistry C
Printing methods are potential strategies to realize the fabrication of flexible electronics on a large scale with low cost, and have been widely adopted to fabricate flexible electronic whiskers (e-whiskers). However, the sensors fabricated by these methods are typically fragile to surface damage as their conductive pattern is exposed on the surface. Here, conductive ink formed by zero-dimensional conductive nanomaterials, is used to write on leather to fabricate a leather-based e-whisker. Owing to the porosity of leather, the ink can permeate into the leather and form a three-dimensional conductive pathway. The good mechanical properties and special structure of leather enable the sensor to have good performance in tape tests, abrasion tests and washing tests. Furthermore, when scanning the surface of a substrate, the leather-based e-whisker is sensitive enough to detect a height difference of 50 μm, which makes it capable of surface texture detection, spatial distribution mapping, and wind mapping, etc.
2 April 2020 in Chemical Communications
Co3O4@NGFs can alleviate volumetric expansion, facilitate rapid electron transfer and achieve a high lithium storage capacity during the surface- and diffusion-controlled capacitive processes.
17 August 2020 in Science China Technological Sciences