13 December 2016 in Scientific Reports
We propose a kind of general framework for the design of a perfect linear polarization converter that works in the transmission mode. Using an intuitive picture that is based on the method of bi-directional polarization mode decomposition, it is shown that when the device under consideration simultaneously possesses two complementary symmetry planes, with one being equivalent to a perfect electric conducting surface and the other being equivalent to a perfect magnetic conducting surface, linear polarization conversion can occur with an efficiency of 100% in the absence of absorptive losses. The proposed framework is validated by two design examples that operate near 10 GHz, where the numerical, experimental and analytic results are in good agreements.
7 March 2016 in Scientific Reports
Superconducting nanowire single photon detectors (SNSPDs) deliver superior performance over their competitors in the near-infrared regime. However, these detectors have an intrinsic polarization dependence on the incident wave because of their one-dimensional meander structure. In this paper, we propose an approach to eliminate the polarization sensitivity of SNSPDs by using near-field optics to increase the absorption of SNSPDs under transverse magnetic (TM) illumination. In addition, an optical cavity is added to our SNSPD to obtain nearly perfect absorption of the incident wave. Numerical simulations show that the maximum absorption of a designed SNSPD can reach 96% at 1550 nm, and indicate that the absorption difference between transverse electric (TE) and TM polarization is less than 0.5% across a wavelength window of 300 nm. Our work provides the first demonstration of the possibility of designing a polarization-insensitive and highly efficient SNSPD without performing device symmetry improvements.
10 October 2016 in Journal of the Optical Society of America B
Sensor arrays for fast-speed polarimetric imaging rely on the developments of the polarization sensitive photodetectors, of which the absorption efficiency and polarization extinction ratio (PER) are the two major design concerns. This paper presents the numerical results of the design of an efficient superconducting nanowire single photon detector (SNSPD) with high polarization sensitivity by taking advantage of the polarization dependent interferometric effect of a composite mirror. Numerical simulations show that for a SNSPD designed at 1550 nm, the absorption efficiency for parallel polarization is 95% and the PER is . The simulated high PER is in agreement with the value estimated from an analytical model. In order to demonstrate the practicability of the device design, it is also shown that the proposed SNSPD has a good tolerance on fabrication uncertainties. The proposed design of the polarization sensitive SNSPD has a feature that it allows the absorption efficiency and PER to be simultaneously optimized.
6 February 2018 in Optics Express
Polarization sensitive photo-detectors are the key to the implementation of the polarimetric imaging systems, which are proved to have superior performance than their traditional counterparts based on intensity discriminations. In this article, we report the demonstration of a superconducting nanowire single photon detector (SNSPD) of which the response is ultra-sensitive to the polarization state of the incident photons. Measurements carried out on a fabricated SNSPD show that a device efficiency of ~48% can be achieved at 1550 nm for the case of parallel polarization, which is ~420 times larger than that for the case of perpendicular polarization. While the reported polarization ultra-sensitive technique is demonstrated on a single-pixel SNSPD, it is also fully compatible with the multi-pixel SNSPD array platforms that emerged recently.
22 August 2017 in Scientific Reports
We propose and demonstrate a type of a broadband half-wave plate that operates in the reflective mode. It consists of a metal grating embedded in a dielectric slab and placed on top of a grounded metal surface. We theoretically show that owing to the optical feedback effect which originates from the wave reflections at the air-dielectric interface, the proposed half-wave plate exhibits a broadened and flattened response when comparing to the case where the feedback effect is absent. Such a prediction is validated using both numerical and experimental works carried out on a half-wave plate designed at 10 GHz. Moreover, our theoretical analysis also reveals that the half-wave plate has an interesting feature of broad angular response. Taking advantage of these features, we experimentally demonstrate that the proposed device can function as a freely tunable linear polarization converter with polarization conversion residues less than −20 dB in a wide frequency band, under the condition that the incident angle is as large as 45 degrees.
23 February 2024 in Physical Review Applied
Mid-infrared superconducting-nanowire single-photon detectors require higher detector sensitivity because of the weaker photon energy. Previous experiments demonstrated that the sensitivity of superconducting-nanowire single-photon detectors (SNSPDs) could be improved by optimizing the stoichiometry of superconducting films. However, the physical mechanism has not been completely studied. In this work, we attempt to explain the optimization mechanism from the hotspot dynamics point of view of thin films and detectors. We obtained the film’s electron-transport parameters using magnetoconductance and Hall coefficient measurements and characterized the dynamic process of the hotspot based on the hotspot-relaxation time. Based on our experimental results, it is proposed that the stoichiometry of the - film plays a role in the specific heat and boundary thermal conductivity, and therefore, affects the thermal relaxation process and the detector’s sensitivity. The research results may lay the foundation for the development of highly efficient mid-infrared SNSPD.