Fibre-reinforced polymer materials (FRP) are increasingly used to reinforce structural elements. Due to this, it is possible to increase the load-bearing capacity of polymer, wooden, concrete, and metal structures. In this article, the authors collected all the crucial aspects that influence the behaviour of concrete elements reinforced with FRP. The main types of FRP, their characterization, and their impact on the load-carrying capacity of a composite structure are discussed. The most significant aspects, such as type, number of FRP layers including fibre orientation, type of matrix, reinforcement of concrete columns, preparation of a concrete surface, fire-resistance aspects, recommended conditions for the lamination process, FRP laying methods, and design aspects were considered. Attention and special emphasis were focused on the description of the current research results related to various types of concrete reinforced with FRP composites. To understand which aspects should be taken into account when designing concrete reinforcement with composite materials, the main guidelines are presented in tabular form.
The splitting tensile strength of concrete is crucial for structural integrity, as tensile stresses from load and environmental changes often lead to cracking. This study investigates the effectiveness of advanced ensemble machine-learning models, including LightGBM, GBRT, XGBoost, and AdaBoost, in accurately predicting the splitting tensile strength of silica fume-enhanced concrete. Using a robust database split into training (80%) and testing (20%) sets, we assessed model performance through R2, RMSE, and MAE metrics. Results demonstrate that GBRT and XGBoost achieved superior predictive accuracy, with R2 scores reaching 0.999 in training and high precision in testing (XGBoost: R2 = 0.965, RMSE = 0.337; GBRT: R2 = 0.955, RMSE = 0.381), surpassing both LightGBM and AdaBoost. This study highlights GBRT and XGBoost as reliable, efficient alternatives to traditional testing methods, offering substantial time and cost savings. Additionally, SHapley Additive exPlanations (SHAP) analysis was conducted to identify key input features and to elucidate their influence on splitting tensile strength, providing valuable insights into the predictive behavior of silica fume-enhanced concrete. The SHAP analysis reveals that the water-to-binder ratio and curing duration are the most critical factors influencing the splitting tensile strength of silica fume concrete.
The paper presents the results of experimental investigations performed by the authors on the casting position factor. It was proved that at the height of reinforced concrete elements there are different bond conditions. Moreover, the bond depends on concrete mechanical properties, element height as well as concrete mix composition and consistency. The experiments also showed the advisability of determining the casting position factor separately for bars from normal concrete and those from high-performance concrete (HPC). The analysis of investigation results has shown that "good" bond conditions are a relative concept and depend on, among other things, element height. The higher the element the better the concrete to lower bars bond. Consequently, elements of considerable height (higher than 600 mm) demonstrate a bigger difference between concrete to upper bars bond and concrete to lower bars bond.
The aim of this paper is to present an assessment of the slip influence on the deflection of the steel plate-concrete composite beams, which are a new type of a design concept. The proposed method is based on the procedure included in the PN-EN 1992-1-1, which has been modified with taking into consideration interface slip. The theoretical analysis was verified by experimental studies.
The paper presents procedures of the slip calculation in steel and concrete composite structures under quasi-long-term load with flexible stud connectors. To describe the slip relation s = s (P), exponential functions are used as appropriate for using in engineering practice. The former already existing expressions for calculating the slip for short-term loads were generalized. The values of factors for the formula were determined on the basis of the experimental investigation
The article presents a recognition of the current state of the art in the field of bridge structures made using concrete on lightweight aggregate. The article aims to show the reader why aggregate with low mechanical parameters and high absorption can be used in demanding bridge constructions. Divided into two parts, the first presents the history of both topics and compiles the parameters of currently used lightweight aggregates by considering the guidelines applicable in the EU, China, and America concerning bridge construction. The literature review conducted highlighted both the advantages and disadvantages of using lightweight aggregates, presented the knowledge accumulated to date in this area, and identified important research gaps regarding lightweight aggregates. The second part discusses existing or planned bridge structures, taking into account their shapes and material properties. In summary, the challenges involved in the development of lightweight aggregate for bridge structures. The results obtained from the analysis will provide a basis for further research into the development of original lightweight aggregate for bridge structures.