Experimental and numerical results on premixed flame penetration and subsequent propagation in a multichannel burner are presented. The burner consists of the set of planar straight quartz channels which transverse sizes can be varied. It is found that, depending on mixture flow rate, equivalence ratio and channels transverse sizes a big variety of combustion regimes can be observed. These regimes include burner-stabilized flames, upstream propagating flames, and flames stabilized under the burner external surface. The placement of different combustion regimes in equivalence ratio/flow rate plane is plotted by means of experimental and numerical studies. In wide range of parameters, the flame pulsations consisting of repetitive stages of flame ignition, upstream propagation, and quenching take place. Results of numerical simulations obtained in the framework of simplified thermal-diffusion model are found to be in a good qualitative agreement with experimental data and allow to explain experimental findings.
The ignition process in a prescribed flow field was investigated in the frame of a 2D thermal-diffusion model. It is assumed that the heat release in the course of chemical reaction has no influence on flow. The latter is obtained by a hydrodynamic model without taking into account chemical reactions. Initial conditions were represented by a fixed size square domain δ filled with hot combustion products with constant temperature. If the flame is ignited at a chosen minimum value of initial temperature this value is referred to as the ignition temperature Tign for a given size of the hot domain. The minimum ignition energy is determined as a product of ignition temperature and square domain size Eign = Tign δ2. The dependencies of minimum ignition energy on characteristics of time-independent, space-periodic flow field are obtained. The ignition process in the flow field, which is pre-calculated in the frame of the two-dimensional Euler equation for freely decaying turbulence, is also studied. It is found that theoretical results obtained within thermal-diffusion models allow to explain qualitatively some experimental results on the ignition in the turbulent flow.