Discrete spherical polypyrrole (PPy) nanoparticles with a uniform diameter of ∼85 nm and electrical conductivity of ∼10 S cm−1 were fabricated by chemical oxidative polymerization within micelles composed of myristyl trimethyl ammonium bromide (MTAB) and decyl alcohol as the nanoreactors. A methanol-based colloidal dispersion containing 5 wt% PPy was dropcast directly onto fluorine-doped tin oxide (FTO) glass to use as counter electrodes (CEs) in dye-sensitized solar cells (DSSCs). The surface resistivity of the PPy layer on the FTO glass decreased from 624 to 387 Ω sq−1 after post-doping with concentrated HCl vapor for 1 min. The DSSCs made of PPy/FTO and HCl-doped PPy/FTO CEs exhibited power conversion efficiencies of ∼5.28 and ∼6.83%, respectively under standard AM 1.5 sunlight illumination. The post-doped and highly oxidized PPy allowed the electrons to move into the PPy layer readily and facilitated the electrocatalytic reaction of the I3−/I− redox couple, giving enhanced cell performance. Moreover, the cell efficiency was enhanced to ∼7.73% with further fine tuning of the electrolyte composition, which is comparable to the value (∼8.2%) using conventional Pt CEs.
Poly(3,4-ethylenedioxythiophene) nanofibers (PEDOT-NFs) with 10–50 nm diameters and high electrical conductivity (up to 83 S cm−1) have been fabricated chemically within micelles composed of sodium dodecyl sulfate (SDS) as nanoreactors. Dimethyl sulfoxide (DMSO, 5 wt%) was added to a methanol-based colloidal dispersion containing PEDOT-NFs to improve dispersibility. The dye-sensitized solar cells (DSSCs) using PEDOT-NFs as a counter electrode (CE) with low surface resistance and a highly porous surface exhibited enhanced power conversion efficiency (9.2%) compared to bulk PEDOT (6.8%). To date, PEDOT-NFs have shown the highest performance among CEs using PEDOT. It also surpassed the efficiency of platinum (Pt) CEs (8.6%). Electrochemical characterization, such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), showed that PEDOT-NFs efficiently reduced triiodide due to the enhanced electrical and morphological properties, which contributed to the high current density (17.5 mA cm−2) and fill factor (72.6%).