1 October 2006 in Russian Metallurgy (Metally)
The effect of the microstructural parameters and the nonmetallic-inclusion content in a steel on its service properties is analyzed for the rail steels of experimental batches that are produced in Russia and abroad and exhibit different service durabilities upon full-scale tests. The dendritic structures of these steels are different. Measurements of the primary austenite grain size show that it is maximal in the rail steel produced in Austria. The pearlite-colony size in Russian steels is almost half that of Japanese steel. The interlamellar spacings in pearlite of the rail steels of various manufacturers are virtually the same. The Russian steels contain up to 3 vol % grain-boundary ferrite. As compared to the Russian steels, the fracture toughness of the foreign steels is substantially lower. The service durability of a rail is assumed to depend mainly on the nonmetallic-inclusion cleanness of the rail steel. It is shown that quantitative metallography and fractional gas analysis can be used to control the oxide-inclusion cleanness of rail steels. The oxidic cleanness of steel calculated from fractional-gasanalysis data can be used to predict the service durability of rails.
3 February 2016 in Izvestiya. Ferrous Metallurgy
ФУНДАМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ КАК ОСНОВА СОЗДАНИЯ НОВЫХ МАТЕРИАЛОВ И ТЕХНОЛОГИЙ В ОБЛАСТИ МЕТАЛЛУРГИИ. ЧАСТЬ 1
1 September 2011 in Russian Metallurgy (Metally)
The prospects of using barium-bearing master alloys for the deoxidation and modification of wheel steel are considered. The oxygen solubility is thermodynamically calculated in carbon-containing wheel steel melts for various deoxidation versions, and the results of laboratory and industrial experiments on the deoxidation and modification of railroad wheel steel are discussed. Industrial experiments performed at OAO Vyksunsk Metallurgical Works show that the use of barium-bearing master alloys for the deoxidation and modification of wheel steel under mass production conditions leads to a decrease in the nonmetallic inclusion contamination of a metal, a decrease in the rejection of solid-rolled railroad wheels, grain refinement in a metal, and an increase in its mechanical properties.
1 September 2011 in Russian Metallurgy (Metally)
The joint complex deoxidation of carbon steel melts is analyzed. A procedure is proposed to calculate the equilibrium oxygen concentration in a melt. Rail steel is used as an example to study the joint complex deoxidation of a melt by aluminum and silicon. Mullite (2Al2O3 · 3SiO2) and kyanite (Al2O3 · SiO2) are considered as the reaction products. Thermodynamic calculations demonstrate that the deoxidizing capacity of aluminum is increased in the presence of silicon in a melt. In this case, a substantial increase in the deoxidizing capacity in the concentration range 0.001–0.1 wt % Al is achieved when kyanite (Al2O3 · SiO2) forms in the reaction products. The results of laboratory and industrial experiments on complex deoxidation are shown to agree well with the calculated data. These results demonstrate that the proposed calculation procedure can be recommended to determine the equilibrium oxygen concentration in a melt in the presence of several deoxidizing elements.
1 September 2018 in Russian Metallurgy (Metally)
The results of the irradiation of the Inconel 718 alloy with pulsed helium ion and helium plasma fluxes at a power density q = 107 W/cm2and a pulse duration τ ≈ 100 ns in the Vikhr Plasma...
18 March 2010 in Inorganic Materials
The need for using pure starting components in the production of Alnico and Nd-Fe-B system alloys for permanent magnets of high quality is substantiated. The content of gas-forming impurities and nonmetallic inclusions was shown to affect substantially the formation of perfect structure of Alnico-type magnets; optimum conditions of preliminary treatment of the melt to decrease the content of gas-forming elements in ingots were determined. The negative effect of the contamination of starting materials with respect to gas-forming elements was determined and correlations between the oxygen content in Nd-Fe-B magnets and their properties were analyzed.