18 February 2013 in Advanced Materials
24 April 2020 in Nature Communications
Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Achieving such a precise separation using membranes requires Angstrom scale pores with a high level of pore size uniformity. Herein, we demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization (SARIP). The dynamic, self-assembled network of surfactants facilitates faster and more homogeneous diffusion of amine monomers across the water/hexane interface during interfacial polymerization, thereby forming a polyamide active layer with more uniform sub-nanometre pores compared to those formed via conventional interfacial polymerization. The polyamide membrane formed by SARIP exhibits highly size-dependent sieving of solutes, yielding a step-wise transition from low rejection to near-perfect rejection over a solute size range smaller than half Angstrom. SARIP represents an approach for the scalable fabrication of ultra-selective membranes with uniform nanopores for precise separation of ions and small solutes.
21 June 2013 in Advanced Materials
4 December 2013 in Angewandte Chemie International Edition
23 May 2014 in NPG Asia Materials
The separation of oily wastewater, especially emulsified oil/water mixtures, is a worldwide challenge because of the large amount of oily wastewater produced in many industrial processes and daily life. For the treatment of oily wastewater, membrane technology is considered the most efficient method because of its high separation efficiency and relatively simple operational process. In this short review, the recent development of advanced filtration membranes for emulsified oil/water mixture separation is presented. We provide an overview on both traditional filtration membranes, including polymer-dominated and ceramic-based filtration membranes, and recently developed nanomaterial-based functional filtration membranes, especially one-dimensional nanomaterials, for effectively treating emulsified oil/water mixtures. The liquid flux and antifouling property, which are the most important factors for membrane performance evaluation, are described for different types of membranes. Conclusions and perspectives concerning the future development of filtration membranes are also provided.
21 May 2018 in Nature Communications
Nanofiltration (NF) membranes with ultrahigh permeance and high rejection are highly beneficial for efficient desalination and wastewater treatment. Improving water permeance while maintaining the high rejection of state-of-the-art thin film composite (TFC) NF membranes remains a great challenge. Herein, we report the fabrication of a TFC NF membrane with a crumpled polyamide (PA) layer via interfacial polymerization on a single-walled carbon nanotubes/polyether sulfone composite support loaded with nanoparticles as a sacrificial templating material, using metal-organic framework nanoparticles (ZIF-8) as an example. The nanoparticles, which can be removed by water dissolution after interfacial polymerization, facilitate the formation of a rough PA active layer with crumpled nanostructure. The NF membrane obtained thereby exhibits high permeance up to 53.5 l m−2h−1 bar−1 with a rejection above 95% for Na2SO4, yielding an overall desalination performance superior to state-of-the-art NF membranes reported so far. Our work provides a simple avenue to fabricate advanced PA NF membranes with outstanding performance.