13 May 2019 in Journal of Materials Chemistry A
The oxygen evolution reaction (OER) plays a critical role in efficient conversion and storage of renewable energy sources, whereas the active sites for the most representative electrocatalysts, Ni–Fe compounds, remain under debate. In this work, we have developed polymeric carbon nitride (PCN) with atomically dispersed N-coordinated Ni–Fe sites to investigate the OER process. The Ni–Fe dual sites consist of adjacent Ni and Fe atoms coordinated with N atoms in the PCN matrix. NiFe-codoped PCN exhibits higher electrocatalytic activity than monometal-doped catalysts, showing a lower overpotential (310 mV at 10 mA cm−2) and smaller Tafel slope (38 mV dec−1) in 1 M KOH, indicating that Ni–Fe dual-metal sites significantly favor the OER process. According to density functional theory calculations based on the oxidized-NiFe@PCN model, it was found that adjacent Ni and Fe atoms co-participate in the OER process for NiFe-codoped PCN, leading to a much lower energy barrier (0.10 or 0.22 eV for U = 1.58 V), while the effect of electronic modification of the single metal active sites by the other component (Ni sites by Fe sites or vice versa) contributes less to activity enhancement, thus leading to a rational explanation on the synergistic effect of the NiFe-based OER catalysts.
22 February 2018 in Angewandte Chemie International Edition
2 July 2018 in Journal of Materials Chemistry A
Porous graphitic carbons are promising candidates for energy conversion and storage. At present, it is highly desired but remains challenging to construct high-surface-area hierarchical porous graphitic carbons. Herein, graphitic carbon nanosheets with hierarchical pores are easily fabricated from a multifunctional carbonaceous precursor (pentaerythritol melamine phosphate or PMP). The PMP carbonaceous precursor can be readily converted into a 3D macroporous scaffold enclosed by carbon nanosheets via chemical foaming without any sacrificial templates and special drying procedures. Then a subsequent potassium hydroxide chemical activation process dramatically increases the surface area (up to 3853 m2 g−1) and porosity (up to 2.79 cm3 g−1). Simultaneously, graphitization of the carbon nanosheets was promoted with increased aromaticity and size of the polyaromatic units via breaking the phosphate ester bonds with KOH etching at a temperature as low as 800 °C. The resulting porous graphitic carbon nanosheets are constructed with an interconnected continuous three-dimensional network surrounded by predominantly multilayer sp2-bonded carbon with a dense nanometer scale pore structure. Due to such synergistic features, the resulting porous graphitic carbon nanosheets deliver 188 F g−1 specific capacitance and excellent rate performance in nonaqueous electrolytes.
13 September 2018 in ACS Energy Letters
1 March 2019 in RSC Advances
Heteroatom doped graphene as a single-atom catalyst for oxygen reduction reaction (ORR) has received extensive attention in recent years. In this paper, the ORR activity of defective graphene anchoring single heteroatom (IIIA, IVA, VA, VIA and VIIA) was systematically investigated using a dispersion-corrected density functional theory method. For all of the 34 catalysts, 14 of which were further analyzed, and the Gibbs free energy of each elementary reaction was calculated. According to the scaling relationship between ΔGOOH* and ΔGOH*, we further analyzed the rate-determining step of the remaining 20 catalysts. The results show that when the ORR reaction proceeds in the path O2 → OOH → O → OH → H2O, the reaction energy barriers are lower than 0.8 eV for Te-SV, Sb-DV, Pb-SV, Pb-DV, As-SV, As-DV, B-SV, Sn-SV and N-SV. Our result provides a theoretical basis for further exploration of carbon-based single-atom catalysts for ORR.
22 February 2018 in Angewandte Chemie