1 December 2007 in Advanced Drug Delivery Reviews
10 September 2008 in Journal of Materials Chemistry
Nanofibers, mainly fabricated by electrospinning, have exhibited great potential for many emerging environmental applications. They can be considered as one of the safest nanomaterials due to their extremely long length (can be up to hundreds of kilometers) and their ability to be embedded within other media. Their high surface-to-volume ratio, large porosity (up to over 80%) and adjustable functionality are also much more effective than conventional non-woven and polymeric membranes in particulate separation and liquid filtration. Technology advances such as multiple-jet electrospinning and electroblowing for mass production of nanofibers have made it practical to use nanofibrous scaffolds as a unique and breakthrough component in separation media for both gas and liquid filtration. In this review, the opportunities and challenges of using functional nanofibers for several representative environmental applications are reviewed.
5 April 2011 in Journal of Materials Chemistry
The major challenges in membrane technology for water filtration are the development of new materials (e.g. high durability, low cost and low environmental concerns) and new structures (e.g. directed water channels) that can produce high permeation flux (thus low energy input) while maintaining a high selectivity or rejection rate. This highlight discusses the utilization of ultra-fine cellulose nanofibers (UCN, diameter 5–10 nm), made by TEMPO/NaBr/NaClO oxidation of natural cellulose (e.g. wood pulp), in different nanofibrous composite formats that can meet this challenge for microfiltration (MF) and ultrafiltration (UF) applications. The unique features of ultra-fine cellulose nanofibers include small diameter, high surface-to-volume ratio, easy surface functionality, good mechanical properties and good chemical resistance. The electrospun nanofibrous scaffolds with fine pore size defined by the fiber diameter could be used to remove waterborne bacteria at two to three times higher flux when compared to that of commercial MF membranes (e.g., Millipore GS9035). When UCN were used as a functionalized adsorbent infused in the asymmetric two-layered non-woven fibrous format, the membranes exhibited a high ability to remove bacteria (by size exclusion) and viruses (by adsorption) simultaneously. When UCN were used as the barrier layer in an asymmetric three-layered non-woven fibrous format containing fibers of different diameters (from 5 nm to 20 µm), the membranes exhibited a two- to ten-fold increase in permeation flux over commercial membranes for ultrafiltration of oil and water emulsions (e.g., for purification of bilge water in ships or industrially produced water).
30 June 2006 in Journal of Biomedical Materials Research Part A
13 December 2011 in Biomacromolecules
22 December 2011 in ACS Macro Letters