1 February 2019 in Ultrasonics
6 November 2017 in Scientific Reports
We are proposing tunable plasmonic tweezers, consisting two parallel graphene stripes, which can be utilized to effectively trap and sort nanoparticles. We show that by electrostatically tuning the chemical potential of a graphene stripe by about 100 meV (equivalent to ΔVG ≈ 4.4 V), the plasmonic force can be switched efficiently, without a need to switch the laser intensity. This enables high speed and low power switching with a large number of switching cycles. By applying two independent and appropriate gate bias voltages to the stripes, the direction of the plasmonic force can be reversed, which leads to separation of nanoparticles that satisfy the trapping conditions. Numerical simulations show that the potential depths obtained for polystyrene nanoparticles of refractive index n = 1.5717 and radii r ≥ 50 nm is deeper than −10 kBT , confirming the ability of the proposed system to effectively separate such nanoparticles. This capability holds for smaller nanoparticles with larger refractive indices. Finally, performing thermal simulations, we have demonstrated that the heat induced by the illumination increases the fluid temperature by at most 9 °C, having negligible effect on the trapping mechanism. The proposed system opens up new possibilities in developing tunable on-chip manipulation devices, suitable for biological applications.
7 May 2019 in Optics Express
SRSeyed Nader Seyed Reihani
Seyed Nader Seyed Reihani
We present theoretical and experimental studies of the plasmonic properties of hexagonal arrays of gold triangles, fabricated by angle-resolved nanosphere lithography method. Our numerical and experimental results both show that a change in the angle of gold deposition affects the size and the distance between the triangles, leading to a controlled shift in their absorption and scattering spectra. We calculate the force exerted on the polystyrene particles of 650 nm radii numerically while passing above the hexagonal arrays. Simulation results show that the presented hexagonal arrays of gold triangles can operate as efficient plasmonic tweezers with a controllable operating wavelength and high trap strength, owing to the additive interaction of the neighboring triangles. Moreover, we apply the realized plasmonic nanostructures in a conventional optical tweezers configuration and show that the optical tweezers stiffness can be effectively modulated by the plasmonic forces, at the IR wavelength of 1064 nm.
9 March 2022 in Optics and Lasers in Engineering
9 September 2019 in Optics Express
Using a plasmonic graphene ring resonator of resonant frequency 10.38 THz coupled to a plasmonic graphene waveguide, we design a lab-on-a-chip optophoresis system that can function as an efficient plasmonic force switch. Finite difference time domain numerical simulations reveal that an appropriate choice of chemical potentials of the waveguide and ring resonator keeps the proposed structure in on-resonance condition, enabling the system to selectively trap a nanoparticle. Moreover, a change of 250 meV in the ring chemical potential (i.e., equivalent to 2.029 V change in the corresponding applied bias) switches the structure to a nearly perfect off-resonance condition, releasing the trapped particle. The equivalent plasmonic switch ON/OFF ratio at the waveguide output is −15.519 dB. The designed system has the capability of trapping, sorting, controlling, and separating PS nanoparticles of diameters ≥30 nm with a THz source intensity of 14.78 mW/µm2 and ≥22 nm with 29.33 mW/µm2.
12 February 2019 in Physical Review Applied
We present a phononic crystal based on pillars on a substrate that creates local-resonance band gaps, prohibiting surface-acoustic-wave propagation. The created local-resonance band gaps originate from Fano-resonance between the pillars and the substrate, and are shown to be highly influenced by the structural parameters of the pillars. Regarding surface acoustic waveguiding, we introduce a line defect to the crystal where elastic energy can be confined, leading to defect modes with slow group velocity. It is shown that the emerged defect guiding modes can be conducted into the local-resonance gap by adjusting the structural parameters of the defects. Moreover, it is proven that hollow cylinders in the linear defect introduce higher degrees of freedom in the structural parameters of the defect for adjusting the guiding mode, and can lead to narrow-band guiding modes in comparison with the gap width at the vicinity of the mid gap. The achieved narrow-band guiding modes are attributed to the reduced number of allowed resonance frequencies in hollow cylinders due to their reduced effective radius and inherent spatial confinement. Additionally, benefiting from acoustoelectric interaction in piezoelectric materials, we can modulate the elasticity of the structures by varying their conductivity, which can lead to efficient tuning of the designed guiding modes. The required conductivity modulation in the structures is proposed to achieved by UV illumination so that the photogenerated excess carriers screen the electric field associated with the elastic wave, perturbing the wave propagation and affecting the defect guiding modes. The proposed system opens up perspectives for designing reconfigurable, high-quality-factor surface-acoustic-wave devices such as filters and duplexers. The achieved maximum shift of the guiding frequency is about 100 MHz for a defect frequency of 4.18 GHz and a bandwidth of about 100 MHz, suitable for wireless communication applications.