18 January 2021 in IEEE Transactions on Instrumentation and Measurement
Early fault diagnosis of rotating machinery is crucial in the industry. The network parameters of the traditional deep learning-based fault diagnosis method are optimized only by the single loss function, and the extracted features are usually not the most valuable features of the input signal. This article proposes a novel method, attention recurrent autoencoder (AE) hybrid model classification algorithm, for early fault diagnosis and severity detection of rotating machinery. The AE can learn the most valuable features in an unsupervised way. By adjusting the weight proportion of the two loss functions and optimizing the multibranch network simultaneously, the proposed method enables the network to extract the most valuable features of the input signals. Moreover, the proposed method can take the raw 1-D vibration signal as the input and does not need time-frequency conversion. By introducing long short-term memory networks in AE, the time-dependent features of the data can be extracted effectively. The proposed method was verified by five kinds of gears at different pitting degrees under six load conditions. The results indicate that the method can provide simultaneous accurate fault diagnosis and severity detection for different pitting degrees.
12 March 2010 in Journal of Surfactants and Detergents
6 April 2022 in Plant Physiology and Biochemistry
18 March 2021 in Polymers for Advanced Technologies
9 January 2008 in Journal of Surfactants and Detergents
12 February 2021 in IEEE Access
Pitting corrosion of rotating machinery is one of the most common faults in industrial engineering. The convolutional neural network (CNN) is increasingly applied to the fault diagnosis. However, the conventional CNN method will reduce the feature dimension of the collected signal and cause the loss of information during the pooling process. In this paper, a new method based on dilated CNN combined with spatial dropout (DCSD) is proposed to diagnose the early faults of rotating machinery. By filling the convolution kernel, the DCSD method can increase the receptive field of the CNN without increasing the number of parameters while retaining more features of the raw vibration signal of the rotating machine. To avoid the dropout method eliminates the adjacent elements with a strong correlation, the Spatial Dropout method is adopted to reduce the overfitting problem of deep networks. The early pitting gears experiment was designed to verify the DCSD method in this paper. The raw vibration signal data of 6 different healthy states were collected to verify the effectiveness of the method. The experimental results show that the DCSD method proposed can effectively distinguish the different early gears pitting, and the diagnostic accuracy is better than other popular deep learning methods.