Discontinuous deformation analysis (DDA) has gained wide acceptance in geotechnical engineering. The simulation of large-scale engineering problems using DDA is computationally expensive. Thus, improving the calculation efficiency of DDA is of significance. The parallel technique based on open multiprocessing (OpenMP) is implemented into DDA. Previous work usually focused on one or two specific subroutines. In contrast, in this paper, all the time-consuming subroutines that have the possibility to do the calculation simultaneously, including contact detection, matrix assembly, simultaneous equation solver, postjudgment of contacts, and block information update, are modified and incorporated with parallel implementation based on OpenMP. The parallel degree can be up to 98%. The computational efficiency of the accelerated DDA is demonstrated by several large-scale simulations with different block quantities running on a different number of threads. As an application, the accelerated DDA is used to efficiently analyze a large-scale landslide, which can efficiently provide information for landslide disaster prevention and mitigation. In conclusion, the accelerated DDA exhibits high performance in the analysis of large-scale problems.
1 February 2018 in Journal of Engineering Mechanics
Estimating the peak value of wind load effects is an important task for engineers of structural and cladding design. Because of the various sources of uncertainties, such as the aerodynamic effect, model selection, and calibration errors, the peak wind load effects may have large variations. This study evaluates the uncertainty of the peak value of wind load effects across multiple samples from a wind tunnel. The Hermite polynomial model (HPM)-based translation process method is adopted to estimate the peak wind load effect. An empirical formula is proposed to estimate the parameters of peak value distribution. Two analytical approaches to model the uncertainty of the peak value at any fractile are proposed based on the probability function and the Gaussianity inference of the peak value. Numerical examples including the wind pressure coefficient and wind-induced response illustrate the performance of the proposed approaches.
8 May 2025 in Earth Surface Processes and Landforms