30 October 2017 in Nuclear Technology
High-temperature oxidation of WWER fuel cladding under loss-of-coolant accident conditions represents a significant problem and an issue of ongoing study. A study of oxidation kinetics under high-temperature steam oxidation was carried out on a sponge-based E110 cladding tube material in as-received state and exposed to a temperature range between 600°C and 1300°C. Metallographic evaluation of the samples was used to determine the analytical dependencies of the processes of the oxide layer and the oxygen stabilized alpha-zirconium layer formation. The formation of this oxide layer and the layer under the oxide (oxygen stabilized alpha-zirconium) was usually considered to follow a parabolic rate law (e.g., Cathcart-Pawel for Zircaloy, and Solyany for iodide/electrolytic E110), however, the recently performed UJP PRAHA a.s. (UJP) experiments showed different kinetics for oxide layers in the whole temperature range between 600°C and 1300°C. The metallographic evaluation showed changing kinetics of oxide layer formation for several temperatures. Therefore, a new oxide layer formation kinetics, different from the parabolic law, was designed. The parabolic rate law was optimized for the oxygen stabilized alpha-zirconium, which is applicable in the temperature range between 950°C and 1300°C. The UJP experimental database containing more than 1000 data values was compared with the newly developed UJP correlations and other available correlations for iodide/electrolytic E110 and Zircaloy alloys. The UJP correlation for weight gain kinetics was compared with experimental data from different laboratories. Finally, a statistical analysis of all tested correlations is provided.
19 June 2024 in Journal of Nuclear Materials
14 June 2017 in EPJ Nuclear Sciences & Technologies
EPJ N - Nuclear Sciences & Technologies
3 May 2019 in Journal of Nuclear Engineering and Radiation Science
Nuclear grade fuel claddings act as a barrier against release of fuel particles into the coolant water during nuclear power plant operation, handling, and wet or dry storage of the spent fuel rods. The integrity of claddings is always a critical issue during the reactor operation, storage, or loss of coolant accidents (LOCA). After Fukushima disaster, cladding materials are widely studied, as the neutron transparent zirconium (Zr)-based alloys or accident tolerant fuel claddings, which should reduce the high-temperature oxidation rate of Zr-based alloys and enhance the accident tolerance. One part of the long-term investigation of Zr-based claddings in the Research Center Řež contributes to the characterization of material behavior after creep testing and high-temperature oxidation, i.e., conditions that may occur during reactor operation or storage of the spent fuel. Then, the microstructure response can be investigated by means of standard as well as advanced microscopy methods. In this study, we introduce the methodology of the cladding microstructure complex characterization demonstrated on the reference (nonirradiated) Zr-1%Nb alloy after creep testing. In the Zr-1%Nb microstructure, the hydrogen is present under some conditions as the hydride phases ZrH or ZrH2 that cause the mechanical properties degradation. As well, the hydride reorientation can pose a risk. Therefore, currently used methods of hydrides evaluation are presented. Furthermore, we introduce the microstructure analysis of the zircalloy-4 cladding after high-temperature oxidation at the temperature 1300 °C simulating LOCA. For this study, the new automatic chemical analysis procedure was developed. The main issue is the determination of the oxygen concentration and alloying elements behavior after critical increase of oxygen in the Zr-alloy tube at LOCA, also concerning the hydrogen content in the microstructure. Based on the element concentration gradients, the phase transitions from the oxide ZrO2 to the prior β-Zr can be determined and contributes to the phase diagrams experimental verification. In our contribution, the significant role of the electron microscopy methods “from micro to nano-scale” in the nuclear research is emphasized in these two research topics.
14 December 2020 in Journal of Nuclear Engineering and Radiation Science
Zirconium-based alloys are one of the most significant materials in thermal-neutron reactor systems. With very low neutron capture cross section, good corrosion resistance, mechanical strength and resistance to neutron radiation damage, zirconium alloys are used for fuel claddings. Cladding materials are still improved and tested in normal as well as critical reactor conditions. Zircaloy-4 (Zr-1.5Sn-0.2Fe-0.1Cr) is used for west types of light-water reactors, Pressurized Water Reactors (PWR). In our study, Zircaloy-4 cladding tubes were high-temperature oxidized in steam at the series of temperatures from 950 up to 1425 °C to simulate PWR reaching severe accident conditions. To observe the influence of hydrogen (H) diffusing from the coolant water on oxidation process, the specimens with ∼1000 ppm H were compared to the specimens with almost no hydrogen content. Wave Dispersive Spectroscopy (WDS) and nanoindentation were performed in line profiles across the cladding wall. Both methods contributed to verify the pseudobinary Zircaloy-4/oxygen phase diagram with focus on determination of phase boundaries. The increase of oxygen concentration with increasing temperature was observed. Moreover, oxygen concentration profiles and related change in nanohardness and Young's modulus showed the effect of hydrogen on the cladding microstructure. Hydrogen dissolved in metallic matrix increases the oxygen solubility in prior β-phase, the specimens with 1000 ppm H showed the higher oxygen content at almost all temperatures. As well, material hardening was observed on specimens with 1000 ppm H with significant difference in β-phase, measured on specimens exposed to lowest and highest oxidation temperature. Thus, with increasing temperature and hydrogen content, increased oxygen solubility affects the cladding ductility.